Skip to content
Was this article helpful?

ica_user

Configuration for Af report for ICA User resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
serverside_packet_retransmits <Double> Read-write Server side packet retransmits..
__count <Double> Read-write count..
country_code <String> Read-write country_code.
ip_block_name <String> Read-write ip_block_name.
app_launch_count <Double> Read-write ica app_launch_count.
active_desktop_count <Double> Read-write ica active_desktop_count..
launch_duration <Double> Read-write ICA App launch duration..
l7_clientside_latency <Double> Read-write L7 clientside latency.
server_jitter <Double> Read-write ICA User server jitter..
latitude <Double> Read-write latitude.
client_jitter <Double> Read-write ICA User client jitter..
id <String> Read-write Id is ICA User Name.

Minimum length = 1

Maximum length = 64
app_enumeration_duration <Double> Read-write app_enumeration_duration..
server_latency <Double> Read-write ICA User server latency..
serverside_0_win <Double> Read-write server side 0 window count..
longitude <Double> Read-write longitude.
region_code <String> Read-write region_code.
user_agent <String> Read-write User Agent Information.
name <String> Read-write Name of ICA User.

Minimum length = 1

Maximum length = 128
region <String> Read-write region.
total_bytes <Double> Read-write Total bytes accounted by this URL in sampled timeframe..
client_subnet <String> Read-write Client Subnet..

Maximum length = 64
ica_rtt <Double> Read-write ICA rtt..
user_count <Double> Read-write user_count..
client_latency <Double> Read-write ICA User client latency..
client_srtt <Double> Read-write client Smothen RTT..
edt_type <String> Read-write edt_type.
active_app_count <Double> Read-write ica active_app_count..
city <String> Read-write city.
session_reconnect <Double> Read-write Session reconnect..
serverside_rto <Double> Read-write serverside rto..
latency <Double> Read-write ICA User total latency..
country <String> Read-write country.
clientside_packet_retransmits <Double> Read-write Client side packet retransmits..
rpt_sample_time <Double> Read-write Report Sample time..
clientside_0_win <Double> Read-write Client side 0 window count..
bandwidth <Double> Read-write Avg Bandwidth..
clientside_rto <Double> Read-write clientside rto..
server_srtt <Double> Read-write server Smothen RTT..
l7_serverside_latency <Double> Read-write L7 serverside latency.

Operations

(click to see Properties )

  • GET (ALL)

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

The following parameters can be used in the nitro request : onerror <String_value>

Use this parameter to set the onerror status for nitro request. Applicable only for bulk requests.

Default value: EXIT

Possible values = EXIT, CONTINUE

get (all)

URL: https://<MGMT-IP>/nitro/v2/config/ica_user

Query-parameters:

cr_enabled Use this query-parameter to indicate cr is enabled or not.

Possible Values: 0, 1

report_start_time Use this query-parameter to specify the start time from which the summary for report is considered.

Possible Values: time in milli seconds

report_end_time Use this query-parameter to specify the end time until where summary for report is considered.

Possible Values: time in milli seconds

asc Use this query-parameter to specify whether the results should be in ascending order or not.

Possible Values: yes, no

sla_enabled Use this query-parameter to indicate sla is enabled or not.

Possible Values: 0, 1

order_by Use this query-parameter to get the result that is ordered by the given property.

Possible Values: ica_rtt, client_latency, server_latency, total_bytes, bandwidth

type Use this query-parameter to specify the type.

Possible Values: ica_rtt, geo

HTTPS Method: GET

Response:

HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "ica_user":[{
      "serverside_packet_retransmits":<Double_value>,
      "__count":<Double_value>,
      "country_code":<String_value>,
      "ip_block_name":<String_value>,
      "app_launch_count":<Double_value>,
      "active_desktop_count":<Double_value>,
      "launch_duration":<Double_value>,
      "l7_clientside_latency":<Double_value>,
      "server_jitter":<Double_value>,
      "latitude":<Double_value>,
      "client_jitter":<Double_value>,
      "id":<String_value>,
      "app_enumeration_duration":<Double_value>,
      "server_latency":<Double_value>,
      "serverside_0_win":<Double_value>,
      "longitude":<Double_value>,
      "region_code":<String_value>,
      "user_agent":<String_value>,
      "name":<String_value>,
      "region":<String_value>,
      "total_bytes":<Double_value>,
      "client_subnet":<String_value>,
      "ica_rtt":<Double_value>,
      "user_count":<Double_value>,
      "client_latency":<Double_value>,
      "client_srtt":<Double_value>,
      "edt_type":<String_value>,
      "ica_device_ip_address":<String_value>,
      "active_app_count":<Double_value>,
      "city":<String_value>,
      "session_reconnect":<Double_value>,
      "ica_session_id":<String_value>,
      "serverside_rto":<Double_value>,
      "latency":<Double_value>,
      "country":<String_value>,
      "clientside_packet_retransmits":<Double_value>,
      "rpt_sample_time":<Double_value>,
      "clientside_0_win":<Double_value>,
      "bandwidth":<Double_value>,
      "clientside_rto":<Double_value>,
      "server_srtt":<Double_value>,
      "ica_app_name":<String_value>,
      "l7_serverside_latency":<Double_value>}]}
Was this article helpful?