Skip to content

waf_profile_devices

Configuration for Mapping ADC IPs to configured WAF Profile names resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
parent_profname <String> Read-write Profile Name used for naming a learning group.

Maximum length = 32
waf_profile_name <String> Read-write ADC WAF Profile name.

Maximum length = 32
si_device_ip_address <String> Read-write ADC IP Address.

Maximum length = 512
parent_name <String> Read-write Resource name of parent resource.
ctnsappname <String> Read-write AppName.

Maximum length = 255
id <String> Read-write Id is system generated key for WAF Profile - ADC map.
parent_id <String> Read-write Id of the parent resource.

Operations

(click to see Properties )

  • GET (ALL)
  • GET
  • UPDATE

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

The following parameters can be used in the nitro request : onerror <String_value>

Use this parameter to set the onerror status for nitro request. Applicable only for bulk requests.

Default value: EXIT

Possible values = EXIT, CONTINUE

get (all)

URL: https://<MGMT-IP>/nitro/v2/config/waf_profile_devices

Query-parameters:

filter https://<MGMT-IP>/nitro/v2/config/waf_profile_devices ?filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of waf_profile_devices resources configured on the system. You can set a filter on any property of the resource.

pagesize=#no;pageno=#no https://<MGMT-IP>/nitro/v2/config/waf_profile_devices ?pagesize=#no;pageno=#no

Use this query-parameter to get the waf_profile_devices resources in chunks.

count https://<MGMT-IP>/nitro/v2/config/waf_profile_devices ?count=yes

Use this query-parameter to get the count of waf_profile_devices resources.

HTTPS Method: GET

Request Headers:

Accept: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response:

HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "waf_profile_devices":[{
      "parent_profname":<String_value>,
      "waf_profile_name":<String_value>,
      "si_device_ip_address":<String_value>,
      "parent_name":<String_value>,
      "ctnsappname":<String_value>,
      "id":<String_value>,
      "parent_id":<String_value>}]}

get

URL: https://<MGMT-IP>/nitro/v2/config/waf_profile_devices/id_value<String>

HTTPS Method: GET

Request Headers:

Accept: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response:

HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "waf_profile_devices":[{
      "parent_profname":<String_value>,
      "waf_profile_name":<String_value>,
      "si_device_ip_address":<String_value>,
      "parent_name":<String_value>,
      "ctnsappname":<String_value>,
      "id":<String_value>,
      "parent_id":<String_value>}]}

update

URL: https://<MGMT-IP>/nitro/v2/config/waf_profile_devices/id_value<String>

HTTPS Method: PUT

Request Headers:

Content-Type: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Request Payload:

{"waf_profile_devices":{
      "si_device_ip_address":<String_value>,
      "parent_id":<String_value>,
      "parent_profname":<String_value>,
      "ctnsappname":<String_value>,
      "id":<String_value>,
      "parent_name":<String_value>,
      "waf_profile_name":<String_value>}}

Response:

HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "waf_profile_devices":[{
      "parent_profname":<String_value>,
      "waf_profile_name":<String_value>,
      "si_device_ip_address":<String_value>,
      "parent_name":<String_value>,
      "ctnsappname":<String_value>,
      "id":<String_value>,
      "parent_id":<String_value>}]}
Was this article helpful?