Skip to content
Was this article helpful?

ns_filterpolicy_template

Configuration for Citrix ADC Filter Policy Configure Task resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
priority <Integer> Read-write Policy Priority.
device_groups <String[]> Read-write Device Group Array on which for which template is applied.
name <String> Read-write Name of Policy.
variables <variable_values[]> Read-write Values of Variables used in commands of the configuration template.
state <String> Read-write State of the Policy: enabled/disabled.
devices <String[]> Read-write Device IP Address Array on which template is applied.
actionType <String> Read-write Action Type of the Policy.
actionName <String> Read-write Action Name of the Policy.
expression <String> Read-write Expression of the Policy.

Operations

(click to see Properties )

  • ADD
  • GET (ALL)

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

The following parameters can be used in the nitro request : onerror <String_value>

Use this parameter to set the onerror status for nitro request. Applicable only for bulk requests.

Default value: EXIT

Possible values = EXIT, CONTINUE

add

URL: https://<MGMT-IP>/nitro/v2/config/ns_filterpolicy_template?onerror=<String_value>

HTTPS Method: POST

Request Headers:

Content-Type: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Request Payload:

{"ns_filterpolicy_template": {
      "priority":<Integer_value>,
      "variables":[{
<b>      "name":<String_value></b>,
      "parent_id":<String_value>,
      "default_value":<String_value>,
      "id":<String_value>,
      "values_enum_db":<String_value>,
      "parent_name":<String_value>,
      "value":<String_value>,
      "description":<String_value>,
      "type":<String_value>,
      "valuex":<String_value>,
      "device_values":[{
      "value":<String_value>,
      "id":<String_value>,
      "device":<String_value>,
      "device_group":<String_value>,
      "valuex":<String_value>}],
      "display_name":<String_value>}],
      "state":<String_value>,
      "actionType":<String_value>,
      "actionName":<String_value>,
      "expression":<String_value>,
      "device_groups":<String_value[]>,
      "name":<String_value>,
      "devices":<String_value[]>}}

Response:

HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "ns_filterpolicy_template":[{
      "priority":<Integer_value>,
      "device_groups":<String_value>,
      "name":<String_value>,
      "variables":[{
      "device_values_mapping":<String_value>,
      "parent_name":<String_value>,
      "value":<String_value>,
      "name":<String_value>,
      "valuex":<String_value>,
      "display_name":<String_value>,
      "description":<String_value>,
      "device_values":[{
      "parent_name":<String_value>,
      "value":<String_value>,
      "id":<String_value>,
      "valuex":<String_value>,
      "device_group":<String_value>,
      "device":<String_value>,
      "parent_id":<String_value>}],
      "parent_id":<String_value>,
      "default_value":<String_value>,
      "id":<String_value>,
      "type":<String_value>,
      "values_enum_db":<String_value>}],
      "state":<String_value>,
      "devices":<String_value>,
      "actionType":<String_value>,
      "actionName":<String_value>,
      "expression":<String_value>}]}

get (all)

URL: https://<MGMT-IP>/nitro/v2/config/ns_filterpolicy_template

Query-parameters:

filter https://<MGMT-IP>/nitro/v2/config/ns_filterpolicy_template ?filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of ns_filterpolicy_template resources configured on the system. You can set a filter on any property of the resource.

pagesize=#no;pageno=#no https://<MGMT-IP>/nitro/v2/config/ns_filterpolicy_template ?pagesize=#no;pageno=#no

Use this query-parameter to get the ns_filterpolicy_template resources in chunks.

count https://<MGMT-IP>/nitro/v2/config/ns_filterpolicy_template ?count=yes

Use this query-parameter to get the count of ns_filterpolicy_template resources.

HTTPS Method: GET

Request Headers:

Accept: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response:

HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "ns_filterpolicy_template":[{
      "priority":<Integer_value>,
      "device_groups":<String_value>,
      "name":<String_value>,
      "variables":[{
      "device_values_mapping":<String_value>,
      "parent_name":<String_value>,
      "value":<String_value>,
      "name":<String_value>,
      "valuex":<String_value>,
      "display_name":<String_value>,
      "description":<String_value>,
      "device_values":[{
      "parent_name":<String_value>,
      "value":<String_value>,
      "id":<String_value>,
      "valuex":<String_value>,
      "device_group":<String_value>,
      "device":<String_value>,
      "parent_id":<String_value>}],
      "parent_id":<String_value>,
      "default_value":<String_value>,
      "id":<String_value>,
      "type":<String_value>,
      "values_enum_db":<String_value>}],
      "state":<String_value>,
      "devices":<String_value>,
      "actionType":<String_value>,
      "actionName":<String_value>,
      "expression":<String_value>}]}
Was this article helpful?