Skip to content

ns_authenticationvserver

Configuration for NS Authvserver Information resource.

(click to see Operations)

Properties

(click to see Operations)

NameData TypePermissionsDescription
vsvr_port<Integer>Read-writeVserver Port.
Minimum value = 1
Maximum value =
user_managed<Boolean>Read-writeUser Managed Idenfication.
name<String>Read-writeVserver Name.
Minimum length = 1
Maximum length = 100
ns_ip_address<String>Read-writeNS IP Address.
Minimum length = 1
Maximum length = 64
managed<Boolean>Read-writeManaged.
vsvr_ip_address<String>Read-writeVserver IP Address.
Minimum length = 1
Maximum length = 64
throughput<Double>Read-writethroughput value.
id<String>Read-writeId is system generated key.
save_config<Boolean>Read-writeSave configuration after enable/disable.
is_throughput_req<Boolean>Read-writeThroghput required.
hostname<String>Read-onlyHostname of the managed device.
poll_time<Integer>Read-onlyLast Polling Time.
display_name<String>Read-onlyDisplay Name.
state<String>Read-onlyVserver State.
partition_name<String>Read-onlyPartition Name.
vsvr_type<String>Read-onlyVserver Type.

Operations

(click to see Properties)

ENABLE| POLL| GET| DISABLE

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in <green>.

enable

URL: https://<MGMT-IP>/nitro/v1/config/ns_authenticationvserver?action=enable;onerror=<String_value>

HTTP Method: null

Request Payload:

{ns_authenticationvserver: {
<b>"id":<String_value></b>,
"user_managed":<Boolean_value>,
"is_throughput_req":<Boolean_value>,
"ns_ip_address":<String_value>,
"save_config":<Boolean_value>,
"vsvr_port":<Integer_value>,
"name":<String_value>,
"managed":<Boolean_value>,
"vsvr_ip_address":<String_value>,
"throughput":<Double_value>}}

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value>, "ns_authenticationvserver":[{
"vsvr_port":<Integer_value>,
"user_managed":<Boolean_value>,
"name":<String_value>,
"hostname":<String_value>,
"poll_time":<Integer_value>,
"display_name":<String_value>,
"state":<String_value>,
"ns_ip_address":<String_value>,
"managed":<Boolean_value>,
"partition_name":<String_value>,
"vsvr_ip_address":<String_value>,
"vsvr_type":<String_value>,
"throughput":<Double_value>,
"id":<String_value>,
"save_config":<Boolean_value>,
"is_throughput_req":<Boolean_value>}]}

poll

URL: https://<MGMT-IP>/nitro/v1/config/ns_authenticationvserver?action=poll;onerror=<String_value>

HTTP Method: null

Request Payload:

{ns_authenticationvserver: {
<b>"id":<String_value></b>,
"user_managed":<Boolean_value>,
"is_throughput_req":<Boolean_value>,
"ns_ip_address":<String_value>,
"save_config":<Boolean_value>,
"vsvr_port":<Integer_value>,
"name":<String_value>,
"managed":<Boolean_value>,
"vsvr_ip_address":<String_value>,
"throughput":<Double_value>}}

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value>, "ns_authenticationvserver":[{
"vsvr_port":<Integer_value>,
"user_managed":<Boolean_value>,
"name":<String_value>,
"hostname":<String_value>,
"poll_time":<Integer_value>,
"display_name":<String_value>,
"state":<String_value>,
"ns_ip_address":<String_value>,
"managed":<Boolean_value>,
"partition_name":<String_value>,
"vsvr_ip_address":<String_value>,
"vsvr_type":<String_value>,
"throughput":<Double_value>,
"id":<String_value>,
"save_config":<Boolean_value>,
"is_throughput_req":<Boolean_value>}]}

get

URL: https://<MGMT-IP>/nitro/v1/config/ns_authenticationvserver

HTTP Method: null

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value>, "ns_authenticationvserver":[{
"vsvr_port":<Integer_value>,
"user_managed":<Boolean_value>,
"name":<String_value>,
"hostname":<String_value>,
"poll_time":<Integer_value>,
"display_name":<String_value>,
"state":<String_value>,
"ns_ip_address":<String_value>,
"managed":<Boolean_value>,
"partition_name":<String_value>,
"vsvr_ip_address":<String_value>,
"vsvr_type":<String_value>,
"throughput":<Double_value>,
"id":<String_value>,
"save_config":<Boolean_value>,
"is_throughput_req":<Boolean_value>}]}

disable

URL: https://<MGMT-IP>/nitro/v1/config/ns_authenticationvserver?action=disable;onerror=<String_value>

HTTP Method: null

Request Payload:

{ns_authenticationvserver: {
<b>"id":<String_value></b>,
"user_managed":<Boolean_value>,
"is_throughput_req":<Boolean_value>,
"ns_ip_address":<String_value>,
"save_config":<Boolean_value>,
"vsvr_port":<Integer_value>,
"name":<String_value>,
"managed":<Boolean_value>,
"vsvr_ip_address":<String_value>,
"throughput":<Double_value>}}

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value>, "ns_authenticationvserver":[{
"vsvr_port":<Integer_value>,
"user_managed":<Boolean_value>,
"name":<String_value>,
"hostname":<String_value>,
"poll_time":<Integer_value>,
"display_name":<String_value>,
"state":<String_value>,
"ns_ip_address":<String_value>,
"managed":<Boolean_value>,
"partition_name":<String_value>,
"vsvr_ip_address":<String_value>,
"vsvr_type":<String_value>,
"throughput":<Double_value>,
"id":<String_value>,
"save_config":<Boolean_value>,
"is_throughput_req":<Boolean_value>}]}