Citrix ADM NITRO API Reference

radius_server

Configuration for Radius Server configuration resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
auth_timeout <Integer> Read-write The maximum number of seconds the system will wait for a response from the Radius server.

Maximum value =
group_separator <String> Read-write Group separator string that delimits group names within a RADIUS attribute for RADIUS group extraction.

Maximum length = 7
pass_encoding <String> Read-write Enable password encoding in RADIUS packets send to the RADIUS server.
enable_nas_ip <Boolean> Read-write Enable NAS IP extraction.
radius_key <String> Read-write Key of radius server.

Minimum length = 4

Maximum length = 32
default_authentication_group <String> Read-write This is the default group that is chosen when the authentication succeeds in addition to extracted groups.

Maximum length = 64
ip_vendor_id <Integer> Read-write The vendor ID of the attribute in the RADIUS response which denotes the intranet IP.

Maximum value =
id <String> Read-write Id is system generated key for all the radius servers.
ip_address <String> Read-write IP Address of radius server.

Minimum length = 1

Maximum length = 64
ip_attribute_type <Integer> Read-write The attribute type of the remote IP address attribute in a RADIUS response.

Maximum value =
attribute_type <Integer> Read-write Attribute type for RADIUS group extraction.

Maximum value =
nas_id <String> Read-write NAS ID.

Maximum length = 128
vendor_id <Integer> Read-write Vendor ID for RADIUS group extraction.

Maximum value =
name <String> Read-write Name of radius server.

Minimum length = 1

Maximum length = 128
port <Integer> Read-write Port number of radius server.

Minimum value = 1

Maximum value =
groups_prefix <String> Read-write Prefix string that precedes group names within a RADIUS attribute for RADIUS group extraction.

Maximum length = 31
pwd_vendor_id <Integer> Read-write Vendor ID of the password in the RADIUS response. Used to extract the user password.

Maximum value =
pwd_attribute_type <Integer> Read-write The attribute type of the password attribute in a RADIUS response..

Maximum value =
accounting <Boolean> Read-write Enable accounting in the radius server.
address_type <Integer> Read-only Configuration Type. Values: 0: IPv4, 1: IPv6, -1: Hostname.

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET (ALL)
  • GET
  • UPDATE

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

The following parameters can be used in the nitro request : onerror <String_value>

Use this parameter to set the onerror status for nitro request. Applicable only for bulk requests.

Default value: EXIT

Possible values = EXIT, CONTINUE

add

URL: https://<MGMT-IP>/nitro/v2/config/radius_server?onerror=<String_value> HTTPS Method: POST

Request Headers: Content-Type: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Request Payload:

{"radius_server": {
<b>"radius_key":<String_value></b>,
<b>"ip_address":<String_value></b>,
<b>"name":<String_value></b>,
"pass_encoding":<String_value>,
"ip_attribute_type":<Integer_value>,
"pwd_vendor_id":<Integer_value>,
"groups_prefix":<String_value>,
"nas_id":<String_value>,
"vendor_id":<Integer_value>,
"auth_timeout":<Integer_value>,
"group_separator":<String_value>,
"enable_nas_ip":<Boolean_value>,
"default_authentication_group":<String_value>,
"id":<String_value>,
"port":<Integer_value>,
"pwd_attribute_type":<Integer_value>,
"accounting":<Boolean_value>,
"ip_vendor_id":<Integer_value>,
"attribute_type":<Integer_value>}}

<!--NeedCopy-->

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "radius_server":[{
"auth_timeout":<Integer_value>,
"group_separator":<String_value>,
"pass_encoding":<String_value>,
"enable_nas_ip":<Boolean_value>,
"radius_key":<String_value>,
"default_authentication_group":<String_value>,
"ip_vendor_id":<Integer_value>,
"id":<String_value>,
"ip_address":<String_value>,
"ip_attribute_type":<Integer_value>,
"attribute_type":<Integer_value>,
"nas_id":<String_value>,
"vendor_id":<Integer_value>,
"name":<String_value>,
"port":<Integer_value>,
"groups_prefix":<String_value>,
"pwd_vendor_id":<Integer_value>,
"pwd_attribute_type":<Integer_value>,
"accounting":<Boolean_value>,
"address_type":<Integer_value>}]}

<!--NeedCopy-->

delete

URL: https://<MGMT-IP>/nitro/v2/config/radius_server/id_value<String> HTTPS Method: DELETE

Request Headers: X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt }

<!--NeedCopy-->

get (all)

URL: https://<MGMT-IP>/nitro/v2/config/radius_server Query-parameters:

filter https://<MGMT-IP>/nitro/v2/config/radius_server ?filter=property-name1:property-value1,property-name2:property-value2 Use this query-parameter to get the filtered set of radius_server resources configured on the system. You can set a filter on any property of the resource.

pagesize=#no;pageno=#no https://<MGMT-IP>/nitro/v2/config/radius_server ?pagesize=#no;pageno=#no Use this query-parameter to get the radius_server resources in chunks.

count https://<MGMT-IP>/nitro/v2/config/radius_server ?count=yes Use this query-parameter to get the count of radius_server resources.

HTTPS Method: GET

Request Headers: Accept: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "radius_server":[{
"auth_timeout":<Integer_value>,
"group_separator":<String_value>,
"pass_encoding":<String_value>,
"enable_nas_ip":<Boolean_value>,
"radius_key":<String_value>,
"default_authentication_group":<String_value>,
"ip_vendor_id":<Integer_value>,
"id":<String_value>,
"ip_address":<String_value>,
"ip_attribute_type":<Integer_value>,
"attribute_type":<Integer_value>,
"nas_id":<String_value>,
"vendor_id":<Integer_value>,
"name":<String_value>,
"port":<Integer_value>,
"groups_prefix":<String_value>,
"pwd_vendor_id":<Integer_value>,
"pwd_attribute_type":<Integer_value>,
"accounting":<Boolean_value>,
"address_type":<Integer_value>}]}

<!--NeedCopy-->

get

URL: https://<MGMT-IP>/nitro/v2/config/radius_server/id_value<String> HTTPS Method: GET

Request Headers: Accept: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Headers:

Content-Type:application/json

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "radius_server":[{
"auth_timeout":<Integer_value>,
"group_separator":<String_value>,
"pass_encoding":<String_value>,
"enable_nas_ip":<Boolean_value>,
"radius_key":<String_value>,
"default_authentication_group":<String_value>,
"ip_vendor_id":<Integer_value>,
"id":<String_value>,
"ip_address":<String_value>,
"ip_attribute_type":<Integer_value>,
"attribute_type":<Integer_value>,
"nas_id":<String_value>,
"vendor_id":<Integer_value>,
"name":<String_value>,
"port":<Integer_value>,
"groups_prefix":<String_value>,
"pwd_vendor_id":<Integer_value>,
"pwd_attribute_type":<Integer_value>,
"accounting":<Boolean_value>,
"address_type":<Integer_value>}]}

<!--NeedCopy-->

update

URL: https://<MGMT-IP>/nitro/v2/config/radius_server/id_value<String> HTTPS Method: PUT

Request Headers: Content-Type: application/json

X-NITRO-USER:username_value<String>

X-NITRO-PASS:password_value<String>

or

Cookie:NITRO_AUTH_TOKEN=token_value<String>

Request Payload:

{"radius_server":{
<b>"id":<String_value></b>,
<b>"ip_address":<String_value></b>,
<b>"name":<String_value></b>,
"pass_encoding":<String_value>,
"ip_attribute_type":<Integer_value>,
"pwd_vendor_id":<Integer_value>,
"groups_prefix":<String_value>,
"radius_key":<String_value>,
"nas_id":<String_value>,
"vendor_id":<Integer_value>,
"auth_timeout":<Integer_value>,
"group_separator":<String_value>,
"enable_nas_ip":<Boolean_value>,
"default_authentication_group":<String_value>,
"port":<Integer_value>,
"pwd_attribute_type":<Integer_value>,
"accounting":<Boolean_value>,
"ip_vendor_id":<Integer_value>,
"attribute_type":<Integer_value>}}

<!--NeedCopy-->

Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "radius_server":[{
"auth_timeout":<Integer_value>,
"group_separator":<String_value>,
"pass_encoding":<String_value>,
"enable_nas_ip":<Boolean_value>,
"radius_key":<String_value>,
"default_authentication_group":<String_value>,
"ip_vendor_id":<Integer_value>,
"id":<String_value>,
"ip_address":<String_value>,
"ip_attribute_type":<Integer_value>,
"attribute_type":<Integer_value>,
"nas_id":<String_value>,
"vendor_id":<Integer_value>,
"name":<String_value>,
"port":<Integer_value>,
"groups_prefix":<String_value>,
"pwd_vendor_id":<Integer_value>,
"pwd_attribute_type":<Integer_value>,
"accounting":<Boolean_value>,
"address_type":<Integer_value>}]}

<!--NeedCopy-->
radius_server