Citrix Virtual Apps and Desktops SDK

Get-Brokerhypervisorconnection

Gets hypervisor connections matching the specified criteria.

Syntax

Get-BrokerHypervisorConnection [-Uid] <Int32> [-Property <String[]>] [-AdminAddress <String>] [-BearerToken <String>] [-TraceParent <String>] [-TraceState <String>] [-VirtualSiteId <String>] [<CommonParameters>]

Get-BrokerHypervisorConnection [[-Name] <String>] [-ExplicitPreferredController <Boolean>] [-ExtraSpinUpTimeSecs <Int32>] [-FaultReason <String>] [-FaultState <String>] [-HypHypervisorConnectionUid <Guid>] [-HypHypervisorType <String>] [-IsReady <Boolean>] [-MachineCount <Int32>] [-MaxAbsoluteActiveActions <Int32>] [-MaxAbsoluteNewActionsPerMinute <Int32>] [-MaxAbsolutePvdPowerActions <Int32>] [-MaxPercentageActiveActions <Int32>] [-MaxPvdPowerActionsPercentageOfDesktops <Int32>] [-Metadata <String>] [-PreferredController <String>] [-State <HypervisorConnectionState>] [-ZoneExternalUid <Guid>] [-ZoneUid <Guid>] [-ReturnTotalRecordCount] [-MaxRecordCount <Int32>] [-Skip <Int32>] [-SortBy <String>] [-Filter <String>] [-FilterScope <Guid>] [-Property <String[]>] [-AdminAddress <String>] [-BearerToken <String>] [-TraceParent <String>] [-TraceState <String>] [-VirtualSiteId <String>] [<CommonParameters>]
<!--NeedCopy-->

Detailed Description

The Get-BrokerHypervisorConnection cmdlet gets hypervisor connections matching the specified criteria. If no parameters are specified this cmdlet enumerates all hypervisor connections.

Brokerhypervisorconnection Object

The BrokerHypervisorConnection represents hypervisor connection object. It contains the following properties:

  • Capabilities (System.String[]) The set of capabilities as reported by the hypervisor.

  • ExplicitPreferredController (System.Boolean?) Whether the PreferredController property was explicity set through the SDK or automatically chosen.

  • ExtraSpinUpTimeSecs (System.Int32?) The extra time a VM is allowed to start before it is marked as failed on session launch

  • FaultReason (System.String) Detailed fault state description if connection is currently in a fault state.

  • FaultState (System.String) Current fault state indicator associsted with hypervisor connection, or ‘None’ if connection is operating normally.

  • HypervisorCapabilities (System.String[]) The set of hypervisor capabilities as reported by the hypervisor.

  • HypHypervisorConnectionUid (System.Guid) The Guid that identifies the hypervisor connection.

  • HypHypervisorType (System.String) The type of hypervisor connected to.

  • IsReady (System.Boolean) Indicates that the connection is ready to be used in the configuration of managed machines.

  • MachineCount (System.Int32) Count of machines associated with this hypervisor connection.

  • MaxAbsoluteActiveActions (System.Int32?) Maximum number of active power actions allowed at any one time (defined in the metadata named ‘Citrix_Broker_MaxAbsoluteActiveActions’ on the hypervisor connection in the Citrix Hosting Service).

  • MaxAbsoluteNewActionsPerMinute (System.Int32?) Maximum number of new actions that can be fired off to the hypervisor in any one minute (defined in the metadata named ‘Citrix_Broker_MaxAbsoluteNewActionsPerMinute’ on the hypervisor connection in the Citrix Hosting Service).

  • MaxAbsolutePvdPowerActions (System.Int32?) This property is no longer supported.

  • MaxPercentageActiveActions (System.Int32?) Maximum percentage of machines on the connection that can have active power actions at any one time (defined in the metadata named ‘Citrix_Broker_MaxPowerActionsPercentageOfDesktops’ on the hypervisor connection in the Citrix Hosting Service).

  • MaxPvdPowerActionsPercentageOfDesktops (System.Int32?) This property is no longer supported.

  • MetadataMap (System.Collections.Generic.Dictionary<string, string>) Collection of all the metadata associated to the hypervisor connection.

  • Name (System.String) The display name of the hypervisor connection.

  • PreferredController (System.String) The name of the controller which is preferred to be used, when available, to perform all communication to the hypervisor. The name is in DOMAIN\machine form. A preferred controller may have been automatically chosen when the hypervisor connection was created.

  • State (Citrix.Broker.Admin.SDK.HypervisorConnectionState) The state of the hypervisor connection.

  • Uid (System.Int32) Unique internal identifier of hypervisor connection.

  • ZoneExternalUid (System.Guid?) The Guid that is the external zone uid of the hypervisor connection.

  • ZoneUid (System.Guid?) The Guid that identifies the zone associated with the hypervisor connection.

Parameters

Name Description Required? Pipeline Input Default Value
Uid Gets the hypervisor connection with the specified internal id. true false  
Name Gets hypervisor connections with the specified name. false false  
ExplicitPreferredController Gets hypervisor connections based on whether their preferred controller was explicitly specified or not false false  
ExtraSpinUpTimeSecs Gets the extra time a VM is allowed to start before it is marked as failed on session launch false false  
FaultReason Gets hypervisor connections with fault reasons matching that specified. false false  
FaultState Gets hypervisor connections with fault states matching that specified. false false  
HypHypervisorConnectionUid Gets hypervisor connections with the specified Guid. false false  
HypHypervisorType Gets hypervisor connections with the specified value of the hypervisor type. false false  
IsReady Gets hypervisor connections with the specified value of the IsReady flag. false false  
MachineCount Gets hypervisor connections with the specified machine count. false false  
MaxAbsoluteActiveActions Gets hypervisor connections with the specified MaxAbsoluteActiveActions value. false false  
MaxAbsoluteNewActionsPerMinute Gets hypervisor connections with the specified MaxAbsoluteNewActionsPerMinute value. false false  
MaxAbsolutePvdPowerActions This property is no longer supported. false false  
MaxPercentageActiveActions Gets hypervisor connections with the specified MaxPercentageActiveActions value. false false  
MaxPvdPowerActionsPercentageOfDesktops This property is no longer supported. false false  
Metadata Gets records with matching metadata entries.      
The value being compared with is a concatenation of the key name, a colon, and the value. For example: -Metadata “abc:x*” matches records with a metadata entry having a key name of “abc” and a value starting with the letter “x”. false false    
PreferredController Gets hypervisor connections with the specified preferred controller. Specify the SAM name of the controller. false false  
State Gets hypervisor connections with the specified connection state. Values can be can be:      

o Unavailable - The broker is unable to contact the hypervisor.
o InMaintenanceMode - The hosting server is in maintenance mode.
o On - The broker is in contact with the hypervisor. | false | false | | | ZoneExternalUid | Gets the hypervisor connections with the specified zone external uid. | false | false | | | ZoneUid | Gets the hypervisor connections with the specified zone uid. | false | false | | | ReturnTotalRecordCount | When specified, this causes the cmdlet to output an error record containing the number of records available. This error record is additional information and does not affect the objects written to the output pipeline. See about_Broker_Filtering for details. | false | false | False | | MaxRecordCount | Specifies the maximum number of records to return. | false | false | 250 | | Skip | Skips the specified number of records before returning results. Also reduces the count returned by -ReturnTotalRecordCount. | false | false | 0 | | SortBy | Sorts the results by the specified list of properties. The list is a set of property names separated by commas, semi-colons, or spaces. Optionally, prefix each name with a + or - to indicate ascending or descending order. Ascending order is assumed if no prefix is present. | false | false | The default sort order is by name or unique identifier. | | Filter | Gets records that match a PowerShell style filter expression. See about_Broker_Filtering for details. | false | false | | | FilterScope | Gets only results allowed by the specified scope id. | false | false | | | Property | Specifies the properties to be returned. This is similar to piping the output of the command through Select-Object, but the properties are filtered more efficiently at the server. | false | false | | | AdminAddress | Specifies the address of a XenDesktop controller that the PowerShell snapin will connect to. This can be provided as a host name or an IP address. | false | false | Localhost. Once a value is provided by any cmdlet, this value will become the default. | | BearerToken | Specifies the bearer token assigned to the calling user | false | false | | | TraceParent | Specifies the trace parent assigned for internal diagnostic tracing use | false | false | | | TraceState | Specifies the trace state assigned for internal diagnostic tracing use | false | false | | | VirtualSiteId | Specifies the virtual site the PowerShell snap-in will connect to. | false | false | |

Input Type

None

Return Values

Citrix.Broker.Admin.Sdk.Hypervisorconnection

Get-BrokerHypervisorConnection returns an object for each matching hypervisor connection.

Examples

Example 1

C:\PS> $hvConn = Get-BrokerHypervisorConnection -Name "hvConnectionName"
<!--NeedCopy-->

Description

Gets a hypervisor connection by name.

Example 2

C:\PS> $hvConn = Get-BrokerHypervisorConnection -PreferredController "domainName\controllerName"
<!--NeedCopy-->

Description

Gets hypervisor connections by preferred controller.

Example 3

C:\PS> $machine = Get-BrokerMachine -Uid $machineUid

C:\PS> $hvConn = Get-BrokerHypervisorConnection -Uid $machine.HypervisorConnectionUid
<!--NeedCopy-->

Description

Gets hypervisor connection used by a (power managed) machine.

Get-Brokerhypervisorconnection