snmp manager¶
The following operations can be performed on "snmp manager":
add snmp manager¶
Specifies an SNMP manager to query the NetScaler appliance. The added manager complies with SNMP V1, V2, and V3. If you specify one or more SNMP managers, the appliance does not accept SNMP queries from any hosts except the specified SNMP managers. You can specify up to a maximum of 100 IP based SNMP managers or networks and a maximum of 5 host-name based SNMP managers.
Synopsys¶
add snmp manager <IPAddress> ... [-netmask <netmask>] [-domainResolveRetry <integer>]
Arguments¶
IPAddress
IP address of the SNMP manager. Can be an IPv4 or IPv6 address. You can instead specify an IPv4 network address or IPv6 network prefix if you want the NetScaler appliance to respond to SNMP queries from any device on the specified network. Alternatively, instead of an IPv4 address, you can specify a host name that has been assigned to an SNMP manager. If you do so, you must add a DNS name server that resolves the host name of the SNMP manager to its IP address.
Note: The NetScaler appliance does not support host names for SNMP managers that have IPv6 addresses.
netmask
Subnet mask associated with an IPv4 network address. If the IP address specifies the address or host name of a specific host, accept the default value of 255.255.255.255.
Default value: 0xFFFFFFFF
domainResolveRetry
Amount of time, in seconds, for which the NetScaler appliance waits before sending another DNS query to resolve the host name of the SNMP manager if the last query failed. This parameter is valid for host-name based SNMP managers only. After a query succeeds, the TTL determines the wait time.
Minimum value: 5
Maximum value: 20939
Example¶
add snmp manager 192.168.1.20 192.168.2.42add snmp manager 192.168.2.16 -netmask 255.255.255.240add snmp manager hostnamemanager.com
rm snmp manager¶
Removes an SNMP manager from the list of managers that are allowed to access the NetScaler appliance.
Synopsys¶
rm snmp manager <IPAddress> ... [-netmask <netmask>]
Arguments¶
IPAddress
IPv4 or IPv6 address (or IPv4 host name) of the SNMP manager, or the IPv4 network address or IPv6 network prefix of the SNMP managers.
netmask
Subnet mask associated with an IPv4 SNMP manager entry. For a specific host, the subnet mask is 255.255.255.255.
Default value: 0xFFFFFFFF
Example¶
rm snmp manager 192.168.1.20rm snmp manager 192.168.2.16 -netmask 255.255.255.240rm snmp manager hostnamemanager.com
set snmp manager¶
Modifies the Domain Resolve Retry parameter of any host-name based SNMP manager configured on the NetScaler appliance.
Synopsys¶
set snmp manager <IPAddress> [-netmask <netmask>] [-domainResolveRetry <integer>]
Arguments¶
IPAddress
Host name of the SNMP manager for which you want to modify the Domain Resolve Retry parameter.
netmask
Subnet mask associated with an IPv4 network address. If the IP address specifies the address or host name of a specific host, accept the default value of 255.255.255.255.
Default value: 0xFFFFFFFF
domainResolveRetry
Amount of time, in seconds, for which the NetScaler appliance waits before sending another DNS query to resolve the host name of the SNMP manager if the last query failed. This parameter is valid for host-name based SNMP managers only. After a query succeeds, the TTL determines the wait time.
Minimum value: 5
Maximum value: 20939
Example¶
set snmp manager www.example.com -domainResolveRetry 7
unset snmp manager¶
Use this command to remove snmp manager settings.Refer to the set snmp manager command for meanings of the arguments.
Synopsys¶
unset snmp manager <IPAddress> -netmask <netmask> -domainResolveRetry
show snmp manager¶
Displays configuration information about all SNMP managers on the NetScaler appliance, or detailed information about the specified manager.
Synopsys¶
show snmp manager [<IPAddress> [-netmask <netmask>]]
Arguments¶
IPAddress
IPv4 or IPv6 address (or IPv4 host name) of the SNMP manager, or the IPv4 network address or IPv6 network prefix of the SNMP managers, about which to display information.
netmask
Subnet mask associated with an IPv4-address based SNMP manager entry. If the IP address specifies a specific host (either the IP address or the host name of the SNMP manager), the subnet mask is 255.255.255.255.
Default value: 0
Outputs¶
IP
The resolved IP address of the hostname manager
domain
IP address of manager. It will be zero for hostname manager
domainResolveRetry
Amount of time, in seconds, for which the NetScaler appliance waits before sending another DNS query to resolve the host name of the SNMP manager if the last query failed. This parameter is valid for host-name based SNMP managers only. After a query succeeds, the TTL determines the wait time.
devno
count
stateflag
Example¶
show snmp manager