Skip to content

bfd session

The following operations can be performed on "bfd session":

show bfd session

Displays the details of the BFD sessions configured in the PE

Synopsys

show bfd session [-localIP <ip_addr|ipv6_addr> [-remoteIP <ip_addr|ipv6_addr>]]

Arguments

localIP

IPV4 or IPV6 Address of Local Node

remoteIP

IPV4 or IPV6 Address of Remote Node

Outputs

state

Current state of the BFD session

localPort

Source Port used by Local node to send Control packets for the BFD session

RemotePort

Source Port used by Remote node to send Control packets for the BFD session

minimumTransmitInterval

Minimum trasmit interval, in milliseconds, the local node would like to use when transmitting BFD Control packets

negotiatedMinimumTransmitInterval

Negotiated Minimum Transmit Interval. This is the interval at which the local node will be sending out BFD control packets

minimumReceiveInterval

Minimum receive interval, in milliseconds, between received BFD Control packets that the local node is capable of supporting

negotiatedMinimumReceiveInterval

Negotiated Minimum Receive Interval. This is the interval at which the local node will be expecting BFD control packets

multiplier

Detection Multiplier. The negotiated transmit interval multiplied by Detection multiplier provides the Detection Time for the remote node for the BFD session.

remoteMultiplier

Your Multiplier. The negotiated receive interval multiplied by Your Multiplier provides the Detection Time for the local node for the BFD session

vlan

VLAN ID on which the BDS session is configured

localDiagnotic

Diagnostic Code specifying the local system's reason for the last change in session state

localDiscriminator

A unique discriminator value generated by the local node for the session

remoteDiscriminator

A unique discriminator value as received from the remote node for the session

passive

Flag indicating that the session is passive

multihop

Flag indicating if the session is multihop

adminDown

Flag indicating if admin down is being sent

originalOwnerPE

Original Owner PE of the BFD session

currentOwnerPE

Current Owner PE of the BFD session

stateflag

ownerNode

The owner node in a Cluster for this BFD session. Owner node can vary from 0 to 31. If ownernode is not specified then the session is treated as Striped session.

devno

count