Skip to content

MapDmr

The following operations can be performed on "MapDmr":

add | rm | show

add MapDmr

Add MAP-T Default Mapping rule.

Synopsys

add MapDmr <name> -BRIpv6Prefix <ipv6_addr|*>

Arguments

name

Name for the Default Mapping Rule. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the MAP Default Mapping Rule is created. The following requirement applies only to the NetScaler CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "add network MapDmr map1 -BRIpv6Prefix 2003::/96").

        Default Mapping Rule (DMR) is defined in terms of the IPv6 prefix advertised by one or more BRs, which provide external connectivity.  A typical MAP-T CE will install an IPv4 default route using this rule.  A BR will use this rule when translating all outside IPv4 source addresses to the IPv6 MAP domain.

BRIpv6Prefix

IPv6 prefix of Border Relay (Netscaler) device.MAP-T CE will send ipv6 packets to this ipv6 prefix.The DMR IPv6 prefix length SHOULD be 64 bits long by default and in any case MUST NOT exceed 96 bits

Example

add network MapDmr map1 -BRIpv6Prefix 2003::/96

rm MapDmr

Remove MAP-T Default Mapping rule.

Synopsys

rm MapDmr <name>

Arguments

name

Name for the Default Mapping Rule. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the MAP Default Mapping Rule is created. The following requirement applies only to the NetScaler CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "add network MapDmr map1 -BRIpv6Prefix 2003::/96").

        Default Mapping Rule (DMR) is defined in terms of the IPv6 prefix advertised by one or more BRs, which provide external connectivity.  A typical MAP-T CE will install an IPv4 default route using this rule.  A BR will use this rule when translating all outside IPv4 source addresses to the IPv6 MAP domain.

Example

rm network MapDmr map1

show MapDmr

Display MAP-T Default Mapping rule.

Synopsys

show MapDmr [<name>]

Arguments

name

Name for the Default Mapping Rule. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the MAP Default Mapping Rule is created. The following requirement applies only to the NetScaler CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "add network MapDmr map1 -BRIpv6Prefix 2003::/96").

        Default Mapping Rule (DMR) is defined in terms of the IPv6 prefix advertised by one or more BRs, which provide external connectivity.  A typical MAP-T CE will install an IPv4 default route using this rule.  A BR will use this rule when translating all outside IPv4 source addresses to the IPv6 MAP domain.

Outputs

BRIpv6Prefix

IPv6 prefix of Border Relay (Netscaler) device.MAP-T CE will send ipv6 packets to this ipv6 prefix.The DMR IPv6 prefix length SHOULD be 64 bits long by default and in any case MUST NOT exceed 96 bits

devno

count

stateflag

Example

show network MapDmr map1