MapDomain¶
The following operations can be performed on "MapDomain":
add | rm | show | stat | bind | unbind
add MapDomain¶
Add MAP Domain.
Synopsys¶
add MapDomain <name> -MapDmrName <string>
Arguments¶
name
Name for the MAP Domain. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the MAP Domain is created . The following requirement applies only to the NetScaler CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "add network MapDomain map1").
MapDmrName
Default Mapping rule name.
Example¶
add network MapDomain map1 -MapBmrName dmr1
rm MapDomain¶
Remove MAP Domain.
Synopsys¶
rm MapDomain <name>
Arguments¶
name
Name for the MAP Domain. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the MAP Domain is created . The following requirement applies only to the NetScaler CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "add network MapDomain map1").
Example¶
rm network MapDomain map1
show MapDomain¶
Display MAP Domain.
Synopsys¶
show MapDomain [<name>]
Arguments¶
name
Name for the MAP Domain. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the MAP Domain is created . The following requirement applies only to the NetScaler CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "add network MapDomain map1").
Outputs¶
MapDmrName
Default Mapping rule name.
MapBmrName
Basic Mapping rule name.
devno
count
stateflag
Example¶
show network MapDomain map1
stat MapDomain¶
Display MAP Domain statistics.
Synopsys¶
stat MapDomain [<name>] [-detail] [-fullValues] [-ntimes <positive_integer>] [-logFile <input_filename>] [-clearstats ( basic | full )]
Arguments¶
name
An integer specifying the VLAN identification number (VID). Possible values: 1 through 4094.
detail
Specifies detailed output (including more statistics). The output can be quite voluminous. Without this argument, the output will show only a summary.
fullValues
Specifies that numbers and strings should be displayed in their full form. Without this option, long strings are shortened and large numbers are abbreviated
ntimes
The number of times, in intervals of seven seconds, the statistics should be displayed.
Default value: 1
Minimum value: 0
logFile
The name of the log file to be used as input.
clearstats
Clear the statsistics / counters
Possible values: basic, full
Outputs¶
count
devno
stateflag
Outputs¶
MAP-T IPv6 TCP Rx packets (v6rxPktsTcp)
Total number of MAP-T IPv6 TCP Recieved packets.
MAP-T IPv6 TCP Tx packets (v6txPktsTcp)
Total number of MAP-T IPv6 TCP Transmitted packets.
MAP-T IPv6 TCP Rx Bytes (v6rxBytesTcp)
Total number of MAP-T IPv6 TCP Recieved Bytes.
MAP-T IPv6 TCP Tx Bytes (v6txBytesTcp)
Total number of MAP-T IPv6 TCP Transmitted Bytes.
MAP-T IPv4 TCP Rx packets (v4rxPktsTcp)
Total number of MAP-T IPv4 TCP Recieved packets.
MAP-T IPv4 TCP Tx packets (v4txPktsTcp)
Total number of MAP-T IPv4 TCP Transmitted packets.
MAP-T IPv4 TCP Rx Bytes (v4rxBytesTcp)
Total number of MAP-T IPv4 TCP Recieved Bytes.
MAP-T IPv4 TCP Tx Bytes (v4txBytesTcp)
Total number of MAP-T IPv4 TCP Transmitted Bytes.
MAP-T IPv6 UDP Rx packets (v6rxPktsUdp)
Total number of MAP-T IPv6 UDP Recieved packets.
MAP-T IPv6 UDP Tx packets (v6txPktsUdp)
Total number of MAP-T IPv6 UDP Transmitted packets.
MAP-T IPv6 UDP Rx Bytes (v6rxBytesUdp)
Total number of MAP-T IPv6 UDP Recieved Bytes.
MAP-T IPv6 UDP Tx Bytes (v6txBytesUdp)
Total number of MAP-T IPv6 UDP Transmitted Bytes.
MAP-T IPv4 UDP Rx packets (v4rxPktsUdp)
Total number of MAP-T IPv4 UDP Recieved packets.
MAP-T IPv4 UDP Tx packets (v4txPktsUdp)
Total number of MAP-T IPv4 UDP Transmitted packets.
MAP-T IPv4 UDP Rx Bytes (v4rxBytesUdp)
Total number of MAP-T IPv4 UDP Recieved Bytes.
MAP-T IPv4 UDP Tx Bytes (v4txBytesUdp)
Total number of MAP-T IPv4 UDP Transmitted Bytes.
MAP-T IPv6 ICMP Rx packets (v6rxPktsIcmp)
Total number of MAP-T IPv6 ICMP Recieved packets.
MAP-T IPv6 ICMP Tx packets (v6txPktsIcmp)
Total number of MAP-T IPv6 ICMP Transmitted packets.
MAP-T IPv6 ICMP Rx Bytes (v6rxBytesIcmp)
Total number of MAP-T IPv6 ICMP Recieved Bytes.
MAP-T IPv6 ICMP Tx Bytes (v6txBytesIcmp)
Total number of MAP-T IPv6 ICMP Transmitted Bytes.
MAP-T IPv4 ICMP Rx packets (v4rxPktsIcmp)
Total number of MAP-T IPv4 ICMP Recieved packets.
MAP-T IPv4 ICMP Tx packets (v4txPktsIcmp)
Total number of MAP-T IPv4 ICMP Transmitted packets.
MAP-T IPv4 ICMP Rx Bytes (v4rxBytesIcmp)
Total number of MAP-T IPv4 ICMP Recieved Bytes.
MAP-T IPv4 ICMP Tx Bytes (v4txBytesIcmp)
Total number of MAP-T IPv4 ICMP Transmitted Bytes.
MAP-T Total V6 Recieved packets (v6rxPkts)
Total number of MAP-T V6 Recieved packets.
MAP-T Total V6 Transmitted packets (v6txPkts)
Total number of MAP-T V6 Transmitted packets.
MAP-T Total V4 Recieved packets (v4rxPkts)
Total number of MAP-T V4 Recieved packets.
MAP-T Total V4 Transmitted packets (v4txPkts)
Total number of MAP-T V4 Transmitted packets.
Example¶
stat mapdomain
bind MapDomain¶
Bind MAP domain with BMR rule.
Synopsys¶
bind MapDomain <name> -MapBmrName <string>
Arguments¶
name
Name for the MAP Domain. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the MAP Domain is created . The following requirement applies only to the NetScaler CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "add network MapDomain map1").
MapBmrName
Basic Mapping rule name.
Example¶
bind network MapDomain map1 -MapBmrName bmr1
unbind MapDomain¶
unbind MAP Domain from BMR rule.
Synopsys¶
unbind MapDomain <name> -MapBmrName <string>
Arguments¶
name
Name for the MAP Domain. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the MAP Domain is created . The following requirement applies only to the NetScaler CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "add network MapDomain map1").
MapBmrName
Basic Mapping rule name.
Example¶
unbind network MapDomain map1 -MapBmrName bmr1