subscriber param¶
The following operations can be performed on "subscriber param":
set subscriber param¶
Modifies the subscriber params.
Synopsys¶
set subscriber param [-keytype IP] [-interfaceType <interfaceType>] [-idleTTL <positive_integer>] [-idleAction <idleAction>] [-ipv6PrefixLookupList <positive_integer> ...]
Arguments¶
keytype
Type of subscriber key type IP or IPANDVLAN
Possible values: IP
Default value: IP
interfaceType
Subscriber Interface refers to Netscaler interaction with control plane protocols, RADIUS and GX.
Types of subscriber interface: NONE, RadiusOnly, RadiusAndGx, GxOnly.
NONE: Only static subscribers can be configured.
RadiusOnly: GX interface is absent. Subscriber information is obtained through RADIUS Accounting messages.
RadiusAndGx: Subscriber ID obtained through RADIUS Accounting is used to query PCRF. Subscriber information is obtained from both RADIUS and PCRF.
GxOnly: RADIUS interface is absent. Subscriber information is queried using Subscriber IP.
Possible values: None, RadiusOnly, RadiusAndGx, GxOnly
Default value: None
idleTTL
q!Idle Timeout, in seconds, after which Netscaler will take an idleAction on a subscriber session (refer to 'idleAction' arguement in 'set subscriber param' for more details on idleAction). Any data-plane or control plane activity updates the idleTimeout on subscriber session. idleAction could be to 'just delete the session' or 'delete and CCR-T' (if PCRF is configured) or 'do not delete but send a CCR-U'.
Zero value disables the idle timeout. !
Default value: 0
Minimum value: 0
Maximum value: 172800
idleAction
q!Once idleTTL exprires on a subscriber session, Netscaler will take an idle action on that session. idleAction could be chosen from one of these ==>
-
ccrTerminate: (default) send CCR-T to inform PCRF about session termination and delete the session.
-
delete: Just delete the subscriber session without informing PCRF.
-
ccrUpdate: Do not delete the session and instead send a CCR-U to PCRF requesting for an updated session. !
Possible values: ccrTerminate, delete, ccrUpdate
Default value: ccrTerminate
ipv6PrefixLookupList
The ipv6PrefixLookupList should consist of all the ipv6 prefix lengths assigned to the UE's'
Minimum value: 1
Maximum value: 128
unset subscriber param¶
Use this command to remove subscriber param settings.Refer to the set subscriber param command for meanings of the arguments.
Synopsys¶
unset subscriber param [-keytype] [-interfaceType] [-idleTTL] [-idleAction]
show subscriber param¶
displays global subscriber params.
Synopsys¶
show subscriber param
Outputs¶
keytype
Type of subscriber key type IP or IPANDVLAN
interfaceType
Subscriber Interface refers to Netscaler interaction with control plane protocols, RADIUS and GX.
Types of subscriber interface: NONE, RadiusOnly, RadiusAndGx, GxOnly.
NONE: Only static subscribers can be configured.
RadiusOnly: GX interface is absent. Subscriber information is obtained through RADIUS Accounting messages.
RadiusAndGx: Subscriber ID obtained through RADIUS Accounting is used to query PCRF. Subscriber information is obtained from both RADIUS and PCRF.
GxOnly: RADIUS interface is absent. Subscriber information is queried using Subscriber IP.
idleTTL
q!Idle Timeout, in seconds, after which Netscaler will take an idleAction on a subscriber session (refer to 'idleAction' arguement in 'set subscriber param' for more details on idleAction). Any data-plane or control plane activity updates the idleTimeout on subscriber session. idleAction could be to 'just delete the session' or 'delete and CCR-T' (if PCRF is configured) or 'do not delete but send a CCR-U'.
Zero value disables the idle timeout. !
idleAction
q!Once idleTTL exprires on a subscriber session, Netscaler will take an idle action on that session. idleAction could be chosen from one of these ==>
-
ccrTerminate: (default) send CCR-T to inform PCRF about session termination and delete the session.
-
delete: Just delete the subscriber session without informing PCRF.
-
ccrUpdate: Do not delete the session and instead send a CCR-U to PCRF requesting for an updated session. !
ipv6PrefixLookupList
The ipv6PrefixLookupList should consist of all the ipv6 prefix lengths assigned to the UE's'
builtin