Skip to content

authentication-samlAction

The following operations can be performed on "authentication-samlAction":

rm| show| add| unset| set|

rm authentication samlAction

Removes a SAML profile (action). An action cannot be removed if it is bound to a policy.

Synopsis

rm authentication samlAction

Arguments

name Name of the SAML profile to be removed.

show authentication samlAction

Displays the current configuration settings for the specified SAML server profile (action).

Synopsis

show authentication samlAction []

Arguments

name Name of the SAML server profile.

Output

metadataUrl This URL is used for obtaining saml metadata. Note that it fills samlIdPCertName and samlredirectUrl fields so those fields should not be updated when metadataUrl present

samlIdPCertName Name of the SSL certificate used to verify responses from SAML Identity Provider (IdP). Note that if metadateURL is present then this filed should be empty.

samlSigningCertName Name of the SSL certificate to sign requests from ServiceProvider (SP) to Identity Provider (IdP).

samlRedirectUrl URL to which users are redirected for authentication. Note that if metadateURL is present then this filed should be empty

samlACSIndex Index/ID of the metadata entry corresponding to this configuration.

samlUserField SAML user ID, as given in the SAML assertion.

samlRejectUnsignedAssertion Reject unsigned SAML assertions. ON option results in rejection of Assertion that is received without signature. STRICT option ensures that both Response and Assertion are signed. OFF allows unsigned Assertions.

samlIssuerName The name to be used in requests sent fromCitrix ADC to IdP to uniquely identify Citrix ADC.

samlTwoFactor Option to enable second factor after SAML

defaultAuthenticationGroup This is the default group that is chosen when the authentication succeeds in addition to extracted groups.

Attribute1 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute1. Maximum length of the extracted attribute is 239 bytes.

Attribute2 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute2. Maximum length of the extracted attribute is 239 bytes.

Attribute3 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute3. Maximum length of the extracted attribute is 239 bytes.

Attribute4 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute4. Maximum length of the extracted attribute is 239 bytes.

Attribute5 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute5. Maximum length of the extracted attribute is 239 bytes.

Attribute6 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute6. Maximum length of the extracted attribute is 239 bytes.

Attribute7 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute7. Maximum length of the extracted attribute is 239 bytes.

Attribute8 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute8. Maximum length of the extracted attribute is 239 bytes.

Attribute9 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute9. Maximum length of the extracted attribute is 239 bytes.

Attribute10 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute10. Maximum length of the extracted attribute is 239 bytes.

Attribute11 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute11. Maximum length of the extracted attribute is 239 bytes.

Attribute12 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute12. Maximum length of the extracted attribute is 239 bytes.

Attribute13 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute13. Maximum length of the extracted attribute is 239 bytes.

Attribute14 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute14. Maximum length of the extracted attribute is 239 bytes.

Attribute15 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute15. Maximum length of the extracted attribute is 239 bytes.

Attribute16 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute16. Maximum length of the extracted attribute is 239 bytes.

Attributes List of attribute names separated by ',' which needs to be extracted. Note that preceeding and trailing spaces will be removed. Attribute name can be 127 bytes and total length of this string should not cross 2047 bytes. These attributes have multi-value support separated by ',' and stored as key-value pair in AAA session

relaystateRule Boolean expression that will be evaluated to validate the SAML Response. Examples: set authentication samlaction -relaystateRule 'AAA.LOGIN.RELAYSTATE.EQ("https://fqdn.com/")' set authentication samlaction -relaystateRule 'AAA.LOGIN.RELAYSTATE.CONTAINS("https://fqdn.com/")' set authentication samlaction -relaystateRule 'AAA.LOGIN.RELAYSTATE.CONTAINS_ANY("patset_name")' set authentication samlAction samlsp -relaystateRule 'AAA.LOGIN.RELAYSTATE.REGEX_MATCH(re#http://.com/#)'.

signatureAlg Algorithm to be used to sign/verify SAML transactions

digestMethod Algorithm to be used to compute/verify digest for SAML transactions

requestedAuthnContext This element specifies the authentication context requirements of authentication statements returned in the response.

authnCtxClassRef This element specifies the authentication class types that are requested from IdP (IdentityProvider). InternetProtocol: This is applicable when a principal is authenticated through the use of a provided IP address. InternetProtocolPassword: This is applicable when a principal is authenticated through the use of a provided IP address, in addition to a username/password. Kerberos: This is applicable when the principal has authenticated using a password to a local authentication authority, in order to acquire a Kerberos ticket. MobileOneFactorUnregistered: This indicates authentication of the mobile device without requiring explicit end-user interaction. MobileTwoFactorUnregistered: This indicates two-factor based authentication during mobile customer registration process, such as secure device and user PIN. MobileOneFactorContract: Reflects mobile contract customer registration procedures and a single factor authentication. MobileTwoFactorContract: Reflects mobile contract customer registration procedures and a two-factor based authentication. Password: This class is applicable when a principal authenticates using password over unprotected http session. PasswordProtectedTransport: This class is applicable when a principal authenticates to an authentication authority through the presentation of a password over a protected session. PreviousSession: This class is applicable when a principal had authenticated to an authentication authority at some point in the past using any authentication context. X509: This indicates that the principal authenticated by means of a digital signature where the key was validated as part of an X.509 Public Key Infrastructure. PGP: This indicates that the principal authenticated by means of a digital signature where the key was validated as part of a PGP Public Key Infrastructure. SPKI: This indicates that the principal authenticated by means of a digital signature where the key was validated via an SPKI Infrastructure. XMLDSig: This indicates that the principal authenticated by means of a digital signature according to the processing rules specified in the XML Digital Signature specification. Smartcard: This indicates that the principal has authenticated using smartcard. SmartcardPKI: This class is applicable when a principal authenticates to an authentication authority through a two-factor authentication mechanism using a smartcard with enclosed private key and a PIN. SoftwarePKI: This class is applicable when a principal uses an X.509 certificate stored in software to authenticate to the authentication authority. Telephony: This class is used to indicate that the principal authenticated via the provision of a fixed-line telephone number, transported via a telephony protocol such as ADSL. NomadTelephony: Indicates that the principal is "roaming" and authenticates via the means of the line number, a user suffix, and a password element. PersonalTelephony: This class is used to indicate that the principal authenticated via the provision of a fixed-line telephone. AuthenticatedTelephony: Indicates that the principal authenticated via the means of the line number, a user suffix, and a password element. SecureRemotePassword: This class is applicable when the authentication was performed by means of Secure Remote Password. TLSClient: This class indicates that the principal authenticated by means of a client certificate, secured with the SSL/TLS transport. TimeSyncToken: This is applicable when a principal authenticates through a time synchronization token. Unspecified: This indicates that the authentication was performed by unspecified means. Windows: This indicates that Windows integrated authentication is utilized for authentication.

customAuthnCtxClassRef This element specifies the custom authentication class reference to be sent as a part of the Authentication Request that is sent by the SP to SAML IDP. The input string must be the body of the authentication class being requested. Input format: Alphanumeric string or URL specifying the body of the Request.If more than one string has to be provided, then the same can be done by specifying the classes as a string of comma separated values. Example input: set authentication samlaction samlact1 -customAuthnCtxClassRef http://www.class1.com/LoA1,http://www.class2.com/LoA2

samlBinding This element specifies the transport mechanism of saml messages.

attributeConsumingServiceIndex Index/ID of the attribute specification at Identity Provider (IdP). IdP will locate attributes requested by SP using this index and send those attributes in Assertion

sendThumbprint Option to send thumbprint instead of x509 certificate in SAML request

enforceUserName Option to choose whether the username that is extracted from SAML assertion can be edited in login page while doing second factor

logoutURL SingleLogout URL on IdP to which logoutRequest will be sent on Citrix ADC session cleanup.

artifactResolutionServiceURL URL of the Artifact Resolution Service on IdP to which Citrix ADC will post artifact to get actual SAML token.

skewTime This option specifies the allowed clock skew in number of minutes that Citrix ADC ServiceProvider allows on an incoming assertion. For example, if skewTime is 10, then assertion would be valid from (current time - 10) min to (current time + 10) min, ie 20min in all.

logoutBinding This element specifies the transport mechanism of saml logout messages.

forceAuthn Option that forces authentication at the Identity Provider (IdP) that receives Citrix ADC's request

groupNameField Name of the tag in assertion that contains user groups.

audience Audience for which assertion sent by IdP is applicable. This is typically entity name or url that represents ServiceProvider

metadataRefreshInterval Interval in minutes for fetching metadata from specified metadata URL

metadataImportStatus Describes metadata import status.

storeSAMLResponse Option to store entire SAML Response through the life of user session.

devno count stateflag

add authentication samlAction

Creates an action (profile) for a Security Assertion Markup Language (SAML) server. The profile contains all configuration data necessary to communicate with that SAML server.

Synopsis

add authentication samlAction ((-metadataUrl [-metadataRefreshInterval ]) | {-samlIdPCertName } | {-samlRedirectUrl }) {-samlSigningCertName } {-samlACSIndex } {-samlUserField } {-samlRejectUnsignedAssertion } {-samlIssuerName } {-samlTwoFactor ( ON | OFF )} [-defaultAuthenticationGroup ] [-Attribute1 ] [-Attribute2 ] [-Attribute3 ] [-Attribute4 ] [-Attribute5 ] [-Attribute6 ] [-Attribute7 ] [-Attribute8 ] [-Attribute9 ] [-Attribute10 ] [-Attribute11 ] [-Attribute12 ] [-Attribute13 ] [-Attribute14 ] [-Attribute15 ] [-Attribute16 ] [-Attributes ] [-relaystateRule ] {-signatureAlg ( RSA-SHA1 | RSA-SHA256 )} {-digestMethod ( SHA1 | SHA256 )} [-requestedAuthnContext ] [-authnCtxClassRef ...] [-customAuthnCtxClassRef ] [-samlBinding ] [-attributeConsumingServiceIndex ] [-sendThumbprint ( ON | OFF )] [-enforceUserName ( ON | OFF )] [-logoutURL ] [-artifactResolutionServiceURL ] [-skewTime ] [-logoutBinding ( REDIRECT | POST )] [-forceAuthn ( ON | OFF )] [-groupNameField ] [-audience ] [-storeSAMLResponse ( ON | OFF )]

Arguments

name Name for the SAML server profile (action). Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Cannot be changed after SAML profile is created.

The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my authentication action" or 'my authentication action').

metadataUrl This URL is used for obtaining saml metadata. Note that it fills samlIdPCertName and samlredirectUrl fields so those fields should not be updated when metadataUrl present

samlIdPCertName Name of the SSL certificate used to verify responses from SAML Identity Provider (IdP). Note that if metadateURL is present then this filed should be empty.

samlSigningCertName Name of the SSL certificate to sign requests from ServiceProvider (SP) to Identity Provider (IdP).

samlRedirectUrl URL to which users are redirected for authentication. Note that if metadateURL is present then this filed should be empty

samlACSIndex Index/ID of the metadata entry corresponding to this configuration. Default value: 255 Minimum value: 0 Maximum value: 255

samlUserField SAML user ID, as given in the SAML assertion.

samlRejectUnsignedAssertion Reject unsigned SAML assertions. ON option results in rejection of Assertion that is received without signature. STRICT option ensures that both Response and Assertion are signed. OFF allows unsigned Assertions.

Possible values: ON, OFF, STRICT Default value: ON

samlIssuerName The name to be used in requests sent fromCitrix ADC to IdP to uniquely identify Citrix ADC.

samlTwoFactor Option to enable second factor after SAML

Possible values: ON, OFF Default value: OFF

defaultAuthenticationGroup This is the default group that is chosen when the authentication succeeds in addition to extracted groups.

Attribute1 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute1. Maximum length of the extracted attribute is 239 bytes.

Attribute2 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute2. Maximum length of the extracted attribute is 239 bytes.

Attribute3 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute3. Maximum length of the extracted attribute is 239 bytes.

Attribute4 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute4. Maximum length of the extracted attribute is 239 bytes.

Attribute5 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute5. Maximum length of the extracted attribute is 239 bytes.

Attribute6 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute6. Maximum length of the extracted attribute is 239 bytes.

Attribute7 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute7. Maximum length of the extracted attribute is 239 bytes.

Attribute8 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute8. Maximum length of the extracted attribute is 239 bytes.

Attribute9 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute9. Maximum length of the extracted attribute is 239 bytes.

Attribute10 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute10. Maximum length of the extracted attribute is 239 bytes.

Attribute11 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute11. Maximum length of the extracted attribute is 239 bytes.

Attribute12 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute12. Maximum length of the extracted attribute is 239 bytes.

Attribute13 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute13. Maximum length of the extracted attribute is 239 bytes.

Attribute14 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute14. Maximum length of the extracted attribute is 239 bytes.

Attribute15 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute15. Maximum length of the extracted attribute is 239 bytes.

Attribute16 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute16. Maximum length of the extracted attribute is 239 bytes.

Attributes List of attribute names separated by ',' which needs to be extracted. Note that preceeding and trailing spaces will be removed. Attribute name can be 127 bytes and total length of this string should not cross 2047 bytes. These attributes have multi-value support separated by ',' and stored as key-value pair in AAA session

relaystateRule Boolean expression that will be evaluated to validate the SAML Response. Examples: set authentication samlaction -relaystateRule 'AAA.LOGIN.RELAYSTATE.EQ("https://fqdn.com/")' set authentication samlaction -relaystateRule 'AAA.LOGIN.RELAYSTATE.CONTAINS("https://fqdn.com/")' set authentication samlaction -relaystateRule 'AAA.LOGIN.RELAYSTATE.CONTAINS_ANY("patset_name")' set authentication samlAction samlsp -relaystateRule 'AAA.LOGIN.RELAYSTATE.REGEX_MATCH(re#http://.com/#)'.

signatureAlg Algorithm to be used to sign/verify SAML transactions

Possible values: RSA-SHA1, RSA-SHA256 Default value: RSA-SHA256

digestMethod Algorithm to be used to compute/verify digest for SAML transactions

Possible values: SHA1, SHA256 Default value: SHA256

requestedAuthnContext This element specifies the authentication context requirements of authentication statements returned in the response.

Possible values: exact, minimum, maximum, better Default value: exact

authnCtxClassRef This element specifies the authentication class types that are requested from IdP (IdentityProvider). InternetProtocol: This is applicable when a principal is authenticated through the use of a provided IP address. InternetProtocolPassword: This is applicable when a principal is authenticated through the use of a provided IP address, in addition to a username/password. Kerberos: This is applicable when the principal has authenticated using a password to a local authentication authority, in order to acquire a Kerberos ticket. MobileOneFactorUnregistered: This indicates authentication of the mobile device without requiring explicit end-user interaction. MobileTwoFactorUnregistered: This indicates two-factor based authentication during mobile customer registration process, such as secure device and user PIN. MobileOneFactorContract: Reflects mobile contract customer registration procedures and a single factor authentication. MobileTwoFactorContract: Reflects mobile contract customer registration procedures and a two-factor based authentication. Password: This class is applicable when a principal authenticates using password over unprotected http session. PasswordProtectedTransport: This class is applicable when a principal authenticates to an authentication authority through the presentation of a password over a protected session. PreviousSession: This class is applicable when a principal had authenticated to an authentication authority at some point in the past using any authentication context. X509: This indicates that the principal authenticated by means of a digital signature where the key was validated as part of an X.509 Public Key Infrastructure. PGP: This indicates that the principal authenticated by means of a digital signature where the key was validated as part of a PGP Public Key Infrastructure. SPKI: This indicates that the principal authenticated by means of a digital signature where the key was validated via an SPKI Infrastructure. XMLDSig: This indicates that the principal authenticated by means of a digital signature according to the processing rules specified in the XML Digital Signature specification. Smartcard: This indicates that the principal has authenticated using smartcard. SmartcardPKI: This class is applicable when a principal authenticates to an authentication authority through a two-factor authentication mechanism using a smartcard with enclosed private key and a PIN. SoftwarePKI: This class is applicable when a principal uses an X.509 certificate stored in software to authenticate to the authentication authority. Telephony: This class is used to indicate that the principal authenticated via the provision of a fixed-line telephone number, transported via a telephony protocol such as ADSL. NomadTelephony: Indicates that the principal is "roaming" and authenticates via the means of the line number, a user suffix, and a password element. PersonalTelephony: This class is used to indicate that the principal authenticated via the provision of a fixed-line telephone. AuthenticatedTelephony: Indicates that the principal authenticated via the means of the line number, a user suffix, and a password element. SecureRemotePassword: This class is applicable when the authentication was performed by means of Secure Remote Password. TLSClient: This class indicates that the principal authenticated by means of a client certificate, secured with the SSL/TLS transport. TimeSyncToken: This is applicable when a principal authenticates through a time synchronization token. Unspecified: This indicates that the authentication was performed by unspecified means. Windows: This indicates that Windows integrated authentication is utilized for authentication.

customAuthnCtxClassRef This element specifies the custom authentication class reference to be sent as a part of the Authentication Request that is sent by the SP to SAML IDP. The input string must be the body of the authentication class being requested. Input format: Alphanumeric string or URL specifying the body of the Request.If more than one string has to be provided, then the same can be done by specifying the classes as a string of comma separated values. Example input: set authentication samlaction samlact1 -customAuthnCtxClassRef http://www.class1.com/LoA1,http://www.class2.com/LoA2

samlBinding This element specifies the transport mechanism of saml messages.

Possible values: REDIRECT, POST, ARTIFACT Default value: POST

attributeConsumingServiceIndex Index/ID of the attribute specification at Identity Provider (IdP). IdP will locate attributes requested by SP using this index and send those attributes in Assertion Default value: 255 Minimum value: 0 Maximum value: 255

sendThumbprint Option to send thumbprint instead of x509 certificate in SAML request

Possible values: ON, OFF Default value: OFF

enforceUserName Option to choose whether the username that is extracted from SAML assertion can be edited in login page while doing second factor

Possible values: ON, OFF Default value: ON

logoutURL SingleLogout URL on IdP to which logoutRequest will be sent on Citrix ADC session cleanup.

artifactResolutionServiceURL URL of the Artifact Resolution Service on IdP to which Citrix ADC will post artifact to get actual SAML token.

skewTime This option specifies the allowed clock skew in number of minutes that Citrix ADC ServiceProvider allows on an incoming assertion. For example, if skewTime is 10, then assertion would be valid from (current time - 10) min to (current time + 10) min, ie 20min in all. Default value: 5

logoutBinding This element specifies the transport mechanism of saml logout messages.

Possible values: REDIRECT, POST Default value: POST

forceAuthn Option that forces authentication at the Identity Provider (IdP) that receives Citrix ADC's request

Possible values: ON, OFF Default value: OFF

groupNameField Name of the tag in assertion that contains user groups.

audience Audience for which assertion sent by IdP is applicable. This is typically entity name or url that represents ServiceProvider

metadataRefreshInterval Interval in minutes for fetching metadata from specified metadata URL Default value: 36000 Minimum value: 0

storeSAMLResponse Option to store entire SAML Response through the life of user session.

Possible values: ON, OFF Default value: OFF

unset authentication samlAction

Use this command to remove authentication samlAction settings.Refer to the set authentication samlAction command for meanings of the arguments.

Synopsis

unset authentication samlAction [-metadataUrl] [-samlSigningCertName] [-samlRedirectUrl] [-samlACSIndex] [-samlUserField] [-samlRejectUnsignedAssertion] [-samlIssuerName] [-samlTwoFactor] [-defaultAuthenticationGroup] [-Attribute1] [-Attribute2] [-Attribute3] [-Attribute4] [-Attribute5] [-Attribute6] [-Attribute7] [-Attribute8] [-Attribute9] [-Attribute10] [-Attribute11] [-Attribute12] [-Attribute13] [-Attribute14] [-Attribute15] [-Attribute16] [-Attributes] [-relaystateRule] [-signatureAlg] [-digestMethod] [-requestedAuthnContext] [-authnCtxClassRef] [-customAuthnCtxClassRef] [-samlBinding] [-attributeConsumingServiceIndex] [-sendThumbprint] [-enforceUserName] [-logoutURL] [-artifactResolutionServiceURL] [-skewTime] [-logoutBinding] [-forceAuthn] [-groupNameField] [-audience] [-metadataRefreshInterval] [-storeSAMLResponse]

set authentication samlAction

Modifies the specified parameters of a SAML server profile (action).

Synopsis

set authentication samlAction [-metadataUrl ] [-samlIdPCertName ] [-samlSigningCertName ] [-samlRedirectUrl ] [-samlACSIndex ] [-samlUserField ] [-samlRejectUnsignedAssertion ] [-samlIssuerName ] [-samlTwoFactor ( ON | OFF )] [-defaultAuthenticationGroup ] [-Attribute1 ] [-Attribute2 ] [-Attribute3 ] [-Attribute4 ] [-Attribute5 ] [-Attribute6 ] [-Attribute7 ] [-Attribute8 ] [-Attribute9 ] [-Attribute10 ] [-Attribute11 ] [-Attribute12 ] [-Attribute13 ] [-Attribute14 ] [-Attribute15 ] [-Attribute16 ] [-Attributes ] [-relaystateRule ] [-signatureAlg ( RSA-SHA1 | RSA-SHA256 )] [-digestMethod ( SHA1 | SHA256 )] [-requestedAuthnContext ] [-authnCtxClassRef ...] [-customAuthnCtxClassRef ] [-samlBinding ] [-attributeConsumingServiceIndex ] [-sendThumbprint ( ON | OFF )] [-enforceUserName ( ON | OFF )] [-logoutURL ] [-artifactResolutionServiceURL ] [-skewTime ] [-logoutBinding ( REDIRECT | POST )] [-forceAuthn ( ON | OFF )] [-groupNameField ] [-audience ] [-metadataRefreshInterval ] [-storeSAMLResponse ( ON | OFF )]

Arguments

name Name of the SAML profile (action) to modify.

metadataUrl This URL is used for obtaining saml metadata. Note that it fills samlIdPCertName and samlredirectUrl fields so those fields should not be updated when metadataUrl present

samlIdPCertName Name of the SSL certificate used to verify responses from SAML Identity Provider (IdP). Note that if metadateURL is present then this filed should be empty.

samlSigningCertName Name of the SSL certificate to sign requests from ServiceProvider (SP) to Identity Provider (IdP).

samlRedirectUrl URL to which users are redirected for authentication. Note that if metadateURL is present then this filed should be empty

samlACSIndex Index/ID of the metadata entry corresponding to this configuration. Default value: 255 Minimum value: 0 Maximum value: 255

samlUserField SAML user ID, as given in the SAML assertion.

samlRejectUnsignedAssertion Reject unsigned SAML assertions. ON option results in rejection of Assertion that is received without signature. STRICT option ensures that both Response and Assertion are signed. OFF allows unsigned Assertions.

Possible values: ON, OFF, STRICT Default value: ON

samlIssuerName The name to be used in requests sent fromCitrix ADC to IdP to uniquely identify Citrix ADC.

samlTwoFactor Option to enable second factor after SAML

Possible values: ON, OFF Default value: OFF

defaultAuthenticationGroup This is the default group that is chosen when the authentication succeeds in addition to extracted groups.

Attribute1 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute1. Maximum length of the extracted attribute is 239 bytes.

Attribute2 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute2. Maximum length of the extracted attribute is 239 bytes.

Attribute3 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute3. Maximum length of the extracted attribute is 239 bytes.

Attribute4 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute4. Maximum length of the extracted attribute is 239 bytes.

Attribute5 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute5. Maximum length of the extracted attribute is 239 bytes.

Attribute6 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute6. Maximum length of the extracted attribute is 239 bytes.

Attribute7 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute7. Maximum length of the extracted attribute is 239 bytes.

Attribute8 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute8. Maximum length of the extracted attribute is 239 bytes.

Attribute9 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute9. Maximum length of the extracted attribute is 239 bytes.

Attribute10 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute10. Maximum length of the extracted attribute is 239 bytes.

Attribute11 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute11. Maximum length of the extracted attribute is 239 bytes.

Attribute12 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute12. Maximum length of the extracted attribute is 239 bytes.

Attribute13 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute13. Maximum length of the extracted attribute is 239 bytes.

Attribute14 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute14. Maximum length of the extracted attribute is 239 bytes.

Attribute15 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute15. Maximum length of the extracted attribute is 239 bytes.

Attribute16 Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute16. Maximum length of the extracted attribute is 239 bytes.

Attributes List of attribute names separated by ',' which needs to be extracted. Note that preceeding and trailing spaces will be removed. Attribute name can be 127 bytes and total length of this string should not cross 2047 bytes. These attributes have multi-value support separated by ',' and stored as key-value pair in AAA session

relaystateRule Boolean expression that will be evaluated to validate the SAML Response. Examples: set authentication samlaction -relaystateRule 'AAA.LOGIN.RELAYSTATE.EQ("https://fqdn.com/")' set authentication samlaction -relaystateRule 'AAA.LOGIN.RELAYSTATE.CONTAINS("https://fqdn.com/")' set authentication samlaction -relaystateRule 'AAA.LOGIN.RELAYSTATE.CONTAINS_ANY("patset_name")' set authentication samlAction samlsp -relaystateRule 'AAA.LOGIN.RELAYSTATE.REGEX_MATCH(re#http://.com/#)'.

signatureAlg Algorithm to be used to sign/verify SAML transactions

Possible values: RSA-SHA1, RSA-SHA256 Default value: RSA-SHA256

digestMethod Algorithm to be used to compute/verify digest for SAML transactions

Possible values: SHA1, SHA256 Default value: SHA256

requestedAuthnContext This element specifies the authentication context requirements of authentication statements returned in the response.

Possible values: exact, minimum, maximum, better Default value: exact

authnCtxClassRef This element specifies the authentication class types that are requested from IdP (IdentityProvider). InternetProtocol: This is applicable when a principal is authenticated through the use of a provided IP address. InternetProtocolPassword: This is applicable when a principal is authenticated through the use of a provided IP address, in addition to a username/password. Kerberos: This is applicable when the principal has authenticated using a password to a local authentication authority, in order to acquire a Kerberos ticket. MobileOneFactorUnregistered: This indicates authentication of the mobile device without requiring explicit end-user interaction. MobileTwoFactorUnregistered: This indicates two-factor based authentication during mobile customer registration process, such as secure device and user PIN. MobileOneFactorContract: Reflects mobile contract customer registration procedures and a single factor authentication. MobileTwoFactorContract: Reflects mobile contract customer registration procedures and a two-factor based authentication. Password: This class is applicable when a principal authenticates using password over unprotected http session. PasswordProtectedTransport: This class is applicable when a principal authenticates to an authentication authority through the presentation of a password over a protected session. PreviousSession: This class is applicable when a principal had authenticated to an authentication authority at some point in the past using any authentication context. X509: This indicates that the principal authenticated by means of a digital signature where the key was validated as part of an X.509 Public Key Infrastructure. PGP: This indicates that the principal authenticated by means of a digital signature where the key was validated as part of a PGP Public Key Infrastructure. SPKI: This indicates that the principal authenticated by means of a digital signature where the key was validated via an SPKI Infrastructure. XMLDSig: This indicates that the principal authenticated by means of a digital signature according to the processing rules specified in the XML Digital Signature specification. Smartcard: This indicates that the principal has authenticated using smartcard. SmartcardPKI: This class is applicable when a principal authenticates to an authentication authority through a two-factor authentication mechanism using a smartcard with enclosed private key and a PIN. SoftwarePKI: This class is applicable when a principal uses an X.509 certificate stored in software to authenticate to the authentication authority. Telephony: This class is used to indicate that the principal authenticated via the provision of a fixed-line telephone number, transported via a telephony protocol such as ADSL. NomadTelephony: Indicates that the principal is "roaming" and authenticates via the means of the line number, a user suffix, and a password element. PersonalTelephony: This class is used to indicate that the principal authenticated via the provision of a fixed-line telephone. AuthenticatedTelephony: Indicates that the principal authenticated via the means of the line number, a user suffix, and a password element. SecureRemotePassword: This class is applicable when the authentication was performed by means of Secure Remote Password. TLSClient: This class indicates that the principal authenticated by means of a client certificate, secured with the SSL/TLS transport. TimeSyncToken: This is applicable when a principal authenticates through a time synchronization token. Unspecified: This indicates that the authentication was performed by unspecified means. Windows: This indicates that Windows integrated authentication is utilized for authentication.

customAuthnCtxClassRef This element specifies the custom authentication class reference to be sent as a part of the Authentication Request that is sent by the SP to SAML IDP. The input string must be the body of the authentication class being requested. Input format: Alphanumeric string or URL specifying the body of the Request.If more than one string has to be provided, then the same can be done by specifying the classes as a string of comma separated values. Example input: set authentication samlaction samlact1 -customAuthnCtxClassRef http://www.class1.com/LoA1,http://www.class2.com/LoA2

samlBinding This element specifies the transport mechanism of saml messages.

Possible values: REDIRECT, POST, ARTIFACT Default value: POST

attributeConsumingServiceIndex Index/ID of the attribute specification at Identity Provider (IdP). IdP will locate attributes requested by SP using this index and send those attributes in Assertion Default value: 255 Minimum value: 0 Maximum value: 255

sendThumbprint Option to send thumbprint instead of x509 certificate in SAML request

Possible values: ON, OFF Default value: OFF

enforceUserName Option to choose whether the username that is extracted from SAML assertion can be edited in login page while doing second factor

Possible values: ON, OFF Default value: ON

logoutURL SingleLogout URL on IdP to which logoutRequest will be sent on Citrix ADC session cleanup.

artifactResolutionServiceURL URL of the Artifact Resolution Service on IdP to which Citrix ADC will post artifact to get actual SAML token.

skewTime This option specifies the allowed clock skew in number of minutes that Citrix ADC ServiceProvider allows on an incoming assertion. For example, if skewTime is 10, then assertion would be valid from (current time - 10) min to (current time + 10) min, ie 20min in all. Default value: 5

logoutBinding This element specifies the transport mechanism of saml logout messages.

Possible values: REDIRECT, POST Default value: POST

forceAuthn Option that forces authentication at the Identity Provider (IdP) that receives Citrix ADC's request

Possible values: ON, OFF Default value: OFF

groupNameField Name of the tag in assertion that contains user groups.

audience Audience for which assertion sent by IdP is applicable. This is typically entity name or url that represents ServiceProvider

metadataRefreshInterval Interval in minutes for fetching metadata from specified metadata URL Default value: 36000 Minimum value: 0

storeSAMLResponse Option to store entire SAML Response through the life of user session.

Possible values: ON, OFF Default value: OFF

Was this article helpful?