Download full document:

ns_crvserver

Configuration for NS CRvserver Information resource.

(click to see Operations)

Properties

(click to see Operations)

NameData TypePermissionsDescription
user_managed<Boolean>Read-writeUser Managed Idenfication.
ns_ip_address<String>Read-writeNS IP Address.
Minimum length = 1
Maximum length = 64
id<String>Read-writeId is system generated key.
vsvr_port<Integer>Read-writeVserver Port.
Minimum value = 1
Maximum value =
name<String>Read-writeVserver Name.
Minimum length = 1
Maximum length = 100
managed<Boolean>Read-writeManaged.
vsvr_ip_address<String>Read-writeVserver IP Address.
Minimum length = 1
Maximum length = 64
throughput<Double>Read-writethroughput value.
save_config<Boolean>Read-writeSave configuration after enable/disable.
is_throughput_req<Boolean>Read-writeThroghput required.
hostname<String>Read-onlyHostname of the managed device.
state<String>Read-onlyVserver State.
cachetype<String>Read-onlyCache Type.
hits<String>Read-onlyVserver Health.
vsvr_type<String>Read-onlyVserver Type.
poll_time<Integer>Read-onlyLast Polling Time.
display_name<String>Read-onlyDisplay Name.
partition_name<String>Read-onlyPartition Name.
targetlbvserver<String>Read-onlyDefault Target LBVserver.

Operations

(click to see Properties)

ENABLE| POLL| GET| DISABLE

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in <green>.

enable

URL: https://<MGMT-IP>/nitro/v1/config/ns_crvserver?action=enable;onerror=<String_value>

HTTP Method: null

Request Payload:

{ns_crvserver: {
<b>"id":<String_value></b>,
"user_managed":<Boolean_value>,
"is_throughput_req":<Boolean_value>,
"ns_ip_address":<String_value>,
"save_config":<Boolean_value>,
"vsvr_port":<Integer_value>,
"name":<String_value>,
"managed":<Boolean_value>,
"vsvr_ip_address":<String_value>,
"throughput":<Double_value>}}

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value>, "ns_crvserver":[{
"user_managed":<Boolean_value>,
"hostname":<String_value>,
"state":<String_value>,
"ns_ip_address":<String_value>,
"cachetype":<String_value>,
"hits":<String_value>,
"vsvr_type":<String_value>,
"id":<String_value>,
"vsvr_port":<Integer_value>,
"name":<String_value>,
"poll_time":<Integer_value>,
"display_name":<String_value>,
"managed":<Boolean_value>,
"partition_name":<String_value>,
"targetlbvserver":<String_value>,
"vsvr_ip_address":<String_value>,
"throughput":<Double_value>,
"save_config":<Boolean_value>,
"is_throughput_req":<Boolean_value>}]}

poll

URL: https://<MGMT-IP>/nitro/v1/config/ns_crvserver?action=poll;onerror=<String_value>

HTTP Method: null

Request Payload:

{ns_crvserver: {
<b>"id":<String_value></b>,
"user_managed":<Boolean_value>,
"is_throughput_req":<Boolean_value>,
"ns_ip_address":<String_value>,
"save_config":<Boolean_value>,
"vsvr_port":<Integer_value>,
"name":<String_value>,
"managed":<Boolean_value>,
"vsvr_ip_address":<String_value>,
"throughput":<Double_value>}}

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value>, "ns_crvserver":[{
"user_managed":<Boolean_value>,
"hostname":<String_value>,
"state":<String_value>,
"ns_ip_address":<String_value>,
"cachetype":<String_value>,
"hits":<String_value>,
"vsvr_type":<String_value>,
"id":<String_value>,
"vsvr_port":<Integer_value>,
"name":<String_value>,
"poll_time":<Integer_value>,
"display_name":<String_value>,
"managed":<Boolean_value>,
"partition_name":<String_value>,
"targetlbvserver":<String_value>,
"vsvr_ip_address":<String_value>,
"throughput":<Double_value>,
"save_config":<Boolean_value>,
"is_throughput_req":<Boolean_value>}]}

get

URL: https://<MGMT-IP>/nitro/v1/config/ns_crvserver

HTTP Method: null

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value>, "ns_crvserver":[{
"user_managed":<Boolean_value>,
"hostname":<String_value>,
"state":<String_value>,
"ns_ip_address":<String_value>,
"cachetype":<String_value>,
"hits":<String_value>,
"vsvr_type":<String_value>,
"id":<String_value>,
"vsvr_port":<Integer_value>,
"name":<String_value>,
"poll_time":<Integer_value>,
"display_name":<String_value>,
"managed":<Boolean_value>,
"partition_name":<String_value>,
"targetlbvserver":<String_value>,
"vsvr_ip_address":<String_value>,
"throughput":<Double_value>,
"save_config":<Boolean_value>,
"is_throughput_req":<Boolean_value>}]}

disable

URL: https://<MGMT-IP>/nitro/v1/config/ns_crvserver?action=disable;onerror=<String_value>

HTTP Method: null

Request Payload:

{ns_crvserver: {
<b>"id":<String_value></b>,
"user_managed":<Boolean_value>,
"is_throughput_req":<Boolean_value>,
"ns_ip_address":<String_value>,
"save_config":<Boolean_value>,
"vsvr_port":<Integer_value>,
"name":<String_value>,
"managed":<Boolean_value>,
"vsvr_ip_address":<String_value>,
"throughput":<Double_value>}}

Response Payload:

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value>, "ns_crvserver":[{
"user_managed":<Boolean_value>,
"hostname":<String_value>,
"state":<String_value>,
"ns_ip_address":<String_value>,
"cachetype":<String_value>,
"hits":<String_value>,
"vsvr_type":<String_value>,
"id":<String_value>,
"vsvr_port":<Integer_value>,
"name":<String_value>,
"poll_time":<Integer_value>,
"display_name":<String_value>,
"managed":<Boolean_value>,
"partition_name":<String_value>,
"targetlbvserver":<String_value>,
"vsvr_ip_address":<String_value>,
"throughput":<Double_value>,
"save_config":<Boolean_value>,
"is_throughput_req":<Boolean_value>}]}