Download full document:

appfwprofile_xmlvalidationurl_binding

Binding object showing the xmlvalidationurl that can be bound to appfwprofile.

Properties

(click to see Operations)

NameData TypePermissionsDescription
state<String>Read-writeEnabled.
Possible values = ENABLED, DISABLED
xmlwsdl<String>Read-writeWSDL object for soap request validation.
xmlendpointcheck<String>Read-writeModifies the behaviour of the Request URL validation w.r.t. the Service URL. If set to ABSOLUTE, the entire request URL is validated with the entire URL mentioned in Service of the associated WSDL. eg: Service URL: http://example.org/ExampleService, Request URL: http//example.com/ExampleService would FAIL the validation. If set to RELAIVE, only the non-hostname part of the request URL is validated against the non-hostname part of the Service URL. eg: Service URL: http://example.org/ExampleService, Request URL: http//example.com/ExampleService would PASS the validation.
Possible values = ABSOLUTE, RELATIVE
name<String>Read-writeName of the profile to which to bind an exemption or rule.
Minimum length = 1
xmlvalidateresponse<String>Read-writeValidate response message.
Possible values = ON, OFF
xmlvalidationurl<String>Read-writeXML Validation URL regular expression.
xmlresponseschema<String>Read-writeXML Schema object for response validation.
xmlvalidatesoapenvelope<String>Read-writeValidate SOAP Evelope only.
Possible values = ON, OFF
xmlrequestschema<String>Read-writeXML Schema object for request validation .
xmladditionalsoapheaders<String>Read-writeAllow addtional soap headers.
Possible values = ON, OFF
comment<String>Read-writeAny comments about the purpose of profile, or other useful information about the profile.
__count<Double>Read-writecount parameter

Operations

(click to see Properties)

ADD:| DELETE:| GET| GET (ALL)| COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add:

URL:http://<netscaler-ip-address/nitro/v1/config/appfwprofile_xmlvalidationurl_binding

HTTP Method:PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{
"appfwprofile_xmlvalidationurl_binding":{
<b>"name":<String_value>,
</b>"comment":<String_value>,
"state":<String_value>,
"xmlvalidationurl":<String_value>,
"xmlrequestschema":<String_value>,
"xmlresponseschema":<String_value>,
"xmlwsdl":<String_value>,
"xmladditionalsoapheaders":<String_value>,
"xmlendpointcheck":<String_value>,
"xmlvalidatesoapenvelope":<String_value>,
"xmlvalidateresponse":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete:

URL:http://<netscaler-ip-address>/nitro/v1/config/appfwprofile_xmlvalidationurl_binding/name_value<String>

Query-parameters:

args

http://<netscaler-ip-address>/nitro/v1/config/appfwprofile_xmlvalidationurl_binding/name_value<String>?args=xmlvalidationurl:<String_value>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get

URL:http://<netscaler-ip-address>/nitro/v1/config/appfwprofile_xmlvalidationurl_binding/name_value<String>

Query-parameters:

filter

http://<netscaler-ip-address>/nitro/v1/config/appfwprofile_xmlvalidationurl_binding/name_value<String>?filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of appfwprofile_xmlvalidationurl_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination

http://<netscaler-ip-address>/nitro/v1/config/appfwprofile_xmlvalidationurl_binding/name_value<String>?pagesize=#no;pageno=#no

Use this query-parameter to get the appfwprofile_xmlvalidationurl_binding resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "appfwprofile_xmlvalidationurl_binding": [ {
"state":<String_value>,
"xmlwsdl":<String_value>,
"xmlendpointcheck":<String_value>,
"name":<String_value>,
"xmlvalidateresponse":<String_value>,
"xmlvalidationurl":<String_value>,
"xmlresponseschema":<String_value>,
"xmlvalidatesoapenvelope":<String_value>,
"xmlrequestschema":<String_value>,
"xmladditionalsoapheaders":<String_value>,
"comment":<String_value>
}]}

get (all)

URL:http://<netscaler-ip-address>/nitro/v1/config/appfwprofile_xmlvalidationurl_binding

Query-parameters:

bulkbindings

http://<netscaler-ip-address>/nitro/v1/config/appfwprofile_xmlvalidationurl_binding?bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "appfwprofile_xmlvalidationurl_binding": [ {
"state":<String_value>,
"xmlwsdl":<String_value>,
"xmlendpointcheck":<String_value>,
"name":<String_value>,
"xmlvalidateresponse":<String_value>,
"xmlvalidationurl":<String_value>,
"xmlresponseschema":<String_value>,
"xmlvalidatesoapenvelope":<String_value>,
"xmlrequestschema":<String_value>,
"xmladditionalsoapheaders":<String_value>,
"comment":<String_value>
}]}

count

URL:http://<netscaler-ip-address>/nitro/v1/config/appfwprofile_xmlvalidationurl_binding/name_value<String>?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{"appfwprofile_xmlvalidationurl_binding": [ { "__count": "#no"} ] }