Download full document:

contentinspectionaction

Configuration for Content Inspection action resource.

Properties

(click to see Operations)

NameData TypePermissionsDescription
name<String>Read-writeName of the remote service action. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters.
type<String>Read-writeType of operation this action is going to perform. following actions are available to configure:
* ICAP - forward the incoming request or response to an ICAP server for modification.
* INLINEINSPECTION - forward the incoming or outgoing packets to IPS server for Intrusion Prevention.
* NSTRACE - capture current and further incoming packets on this transaction.
Possible values = ICAP, INLINEINSPECTION, NSTRACE
servername<String>Read-writeName of the LB vserver or service.
Minimum length = 1
Maximum length = 127
serverip<String>Read-writeIP address of remoteService.
Minimum length = 1
serverport<Double>Read-writePort of remoteService.
Default value: 1344
Minimum value = 1
Maximum value = 65535
icapprofilename<String>Read-writeName of the ICAP profile to be attached to the contentInspection action.
Minimum length = 1
Maximum length = 127
ifserverdown<String>Read-writeName of the action to perform if the Vserver representing the remote service is not UP. There are also some built-in actions which can be used. These are:
* RESET - Reset the client connection by closing it. The client program, such as a browser, will handle this and may inform the user. The client may then resend the request if desired.
* DROP - Drop the request without sending a response to the user.
Default value: CONTINUE
Possible values = CONTINUE, DROP, RESET
reqtimeout<Double>Read-writeTime, in seconds, within which the remote service request must complete. If the request does not complete within this time, the specified request timeout action is executed. Zero disables the timeout.
Default value: 0
Minimum value = 0
Maximum value = 86400
reqtimeoutaction<String>Read-writeName of the action to perform if the Vserver representing the remote service does not respond. There are also some built-in actions which can be used. These are:
* RESET - Reset the client connection by closing it. The client program, such as a browser, will handle this and may inform the user. The client may then resend the request if desired.
* DROP - Drop the request without sending a response to the user.
Default value: BYPASS
Possible values = BYPASS, DROP, RESET
hits<Double>Read-onlyThe number of times the action has been taken.
referencecount<Double>Read-onlyThe number of references to the action.
undefhits<Double>Read-onlyThe number of times the action resulted in UNDEF.
__count<Double>Read-onlycount parameter

Operations

(click to see Properties)

ADD| UPDATE| UNSET| DELETE| GET (ALL)| GET| COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<netscaler-ip-address>/nitro/v1/config/contentinspectionaction

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"contentinspectionaction":{
<b>"name":<String_value>,
</b><b>"type":<String_value>,
</b>"servername":<String_value>,
"serverip":<String_value>,
"serverport":<Double_value>,
"icapprofilename":<String_value>,
"ifserverdown":<String_value>,
"reqtimeout":<Double_value>,
"reqtimeoutaction":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL:http://<netscaler-ip-address>/nitro/v1/config/contentinspectionaction

HTTP Method:PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"contentinspectionaction":{
<b>"name":<String_value>,
</b>"servername":<String_value>,
"serverip":<String_value>,
"serverport":<Double_value>,
"icapprofilename":<String_value>,
"ifserverdown":<String_value>,
"reqtimeout":<Double_value>,
"reqtimeoutaction":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL:http://<netscaler-ip-address>/nitro/v1/config/contentinspectionaction?action=unset

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"contentinspectionaction":{
<b>"name":<String_value>,
</b>"serverport":true,
"ifserverdown":true,
"reqtimeout":true
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL:http://<netscaler-ip-address>/nitro/v1/config/contentinspectionaction/name_value<String>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL:http://<netscaler-ip-address>/nitro/v1/config/contentinspectionaction

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/contentinspectionaction?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<netscaler-ip-address>/nitro/v1/config/contentinspectionaction?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of contentinspectionaction resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http://<netscaler-ip-address>/nitro/v1/config/contentinspectionaction?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<netscaler-ip-address>/nitro/v1/config/contentinspectionaction?pagesize=#no;pageno=#no

Use this query-parameter to get the contentinspectionaction resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "contentinspectionaction": [ {
"name":<String_value>,
"type":<String_value>,
"servername":<String_value>,
"serverip":<String_value>,
"serverport":<Double_value>,
"icapprofilename":<String_value>,
"ifserverdown":<String_value>,
"reqtimeout":<Double_value>,
"reqtimeoutaction":<String_value>,
"hits":<Double_value>,
"referencecount":<Double_value>,
"undefhits":<Double_value>
}]}

get

URL:http://<netscaler-ip-address>/nitro/v1/config/contentinspectionaction/name_value<String>

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/contentinspectionaction/name_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<netscaler-ip-address>/nitro/v1/config/contentinspectionaction/name_value<String>?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "contentinspectionaction": [ {
"name":<String_value>,
"type":<String_value>,
"servername":<String_value>,
"serverip":<String_value>,
"serverport":<Double_value>,
"icapprofilename":<String_value>,
"ifserverdown":<String_value>,
"reqtimeout":<Double_value>,
"reqtimeoutaction":<String_value>,
"hits":<Double_value>,
"referencecount":<Double_value>,
"undefhits":<Double_value>
}]}

count

URL:http://<netscaler-ip-address>/nitro/v1/config/contentinspectionaction?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "contentinspectionaction": [ { "__count": "#no"} ] }