Download full document:

dnsnaptrrec

Configuration for NAPTR record resource.

Properties

(click to see Operations)

NameData TypePermissionsDescription
domain<String>Read-writeName of the domain for the NAPTR record.
Minimum length = 1
order<Double>Read-writeAn integer specifying the order in which the NAPTR records MUST be processed in order to accurately represent the ordered list of Rules. The ordering is from lowest to highest.
Minimum value = 0
Maximum value = 65535
preference<Double>Read-writeAn integer specifying the preference of this NAPTR among NAPTR records having same order. lower the number, higher the preference.
Minimum value = 0
Maximum value = 65535
flags<String>Read-writeflags for this NAPTR.
Maximum length = 255
services<String>Read-writeService Parameters applicable to this delegation path.
Maximum length = 255
regexp<String>Read-writeThe regular expression, that specifies the substitution expression for this NAPTR.
Maximum length = 255
replacement<String>Read-writeThe replacement domain name for this NAPTR.
Maximum length = 255
ttl<Double>Read-writeTime to Live (TTL), in seconds, for the record. TTL is the time for which the record must be cached by DNS proxies. The specified TTL is applied to all the resource records that are of the same record type and belong to the specified domain name. For example, if you add an address record, with a TTL of 36000, to the domain name example.com, the TTLs of all the address records of example.com are changed to 36000. If the TTL is not specified, the NetScaler appliance uses either the DNS zone's minimum TTL or, if the SOA record is not available on the appliance, the default value of 3600.
Default value: 3600
Minimum value = 0
Maximum value = 2147483647
recordid<Double>Read-writeUnique, internally generated record ID. View the details of the naptr record to obtain its record ID. Records can be removed by either specifying the domain name and record id OR by specifying
domain name and all other naptr record attributes as was supplied during the add command.
Minimum value = 1
Maximum value = 65535
ecssubnet<String>Read-writeSubnet for which the cached NAPTR record need to be removed.
type<String>Read-writeType of records to display. Available settings function as follows:
* ADNS - Display all authoritative address records.
* PROXY - Display all proxy address records.
* ALL - Display all address records.
Default value: ADNS
Possible values = ALL, ADNS, PROXY
nodeid<Double>Read-writeUnique number that identifies the cluster node.
Minimum value = 0
Maximum value = 31
authtype<String>Read-onlyAuthentication type.
Possible values = ALL, ADNS, PROXY
vservername<String>Read-onlyVirtual server name.
__count<Double>Read-onlycount parameter

Operations

(click to see Properties)

ADD| DELETE| GET (ALL)| GET| COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<netscaler-ip-address>/nitro/v1/config/dnsnaptrrec

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"dnsnaptrrec":{
<b>"domain":<String_value>,
</b><b>"order":<Double_value>,
</b><b>"preference":<Double_value>,
</b>"flags":<String_value>,
"services":<String_value>,
"regexp":<String_value>,
"replacement":<String_value>,
"ttl":<Double_value>
}}

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL:http://<netscaler-ip-address>/nitro/v1/config/dnsnaptrrec/domain_value<String>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL:http://<netscaler-ip-address>/nitro/v1/config/dnsnaptrrec

Query-parameters:

args

http://<netscaler-ip-address>/nitro/v1/config/dnsnaptrrec?args=domain:<String_value>,type:<String_value>,nodeid:<Double_value>

Use this query-parameter to get dnsnaptrrec resources based on additional properties.

attrs

http://<netscaler-ip-address>/nitro/v1/config/dnsnaptrrec?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<netscaler-ip-address>/nitro/v1/config/dnsnaptrrec?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of dnsnaptrrec resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http://<netscaler-ip-address>/nitro/v1/config/dnsnaptrrec?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<netscaler-ip-address>/nitro/v1/config/dnsnaptrrec?pagesize=#no;pageno=#no

Use this query-parameter to get the dnsnaptrrec resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "dnsnaptrrec": [ {
domain:<String_value>,type:<String_value>,nodeid:<Double_value>"order":<Double_value>,
"preference":<Double_value>,
"flags":<String_value>,
"services":<String_value>,
"regexp":<String_value>,
"replacement":<String_value>,
"ttl":<Double_value>,
"recordid":<Double_value>,
"authtype":<String_value>,
"ecssubnet":<String_value>,
"vservername":<String_value>
}]}

get

URL:http://<netscaler-ip-address>/nitro/v1/config/dnsnaptrrec/domain_value<String>

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/dnsnaptrrec/domain_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<netscaler-ip-address>/nitro/v1/config/dnsnaptrrec/domain_value<String>?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "dnsnaptrrec": [ {
domain:<String_value>,type:<String_value>,nodeid:<Double_value>"order":<Double_value>,
"preference":<Double_value>,
"flags":<String_value>,
"services":<String_value>,
"regexp":<String_value>,
"replacement":<String_value>,
"ttl":<Double_value>,
"recordid":<Double_value>,
"authtype":<String_value>,
"ecssubnet":<String_value>,
"vservername":<String_value>
}]}

count

URL:http://<netscaler-ip-address>/nitro/v1/config/dnsnaptrrec?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "dnsnaptrrec": [ { "__count": "#no"} ] }