Download full document:

ipsecprofile

Configuration for IPSEC profile resource.

Properties

(click to see Operations)

NameData TypePermissionsDescription
name<String>Read-writeThe name of the ipsec profile.
Minimum length = 1
Maximum length = 32
ikeversion<String>Read-writeIKE Protocol Version.
Possible values = V1, V2
encalgo<String[]>Read-writeType of encryption algorithm (Note: Selection of AES enables AES128).
Possible values = AES, 3DES, AES192, AES256
hashalgo<String[]>Read-writeType of hashing algorithm.
Possible values = HMAC_SHA1, HMAC_SHA256, HMAC_SHA384, HMAC_SHA512, HMAC_MD5
lifetime<Double>Read-writeLifetime of IKE SA in seconds. Lifetime of IPSec SA will be (lifetime of IKE SA/8).
Minimum value = 480
Maximum value = 31536000
psk<String>Read-writePre shared key value.
publickey<String>Read-writePublic key file path.
privatekey<String>Read-writePrivate key file path.
peerpublickey<String>Read-writePeer public key file path.
livenesscheckinterval<Double>Read-writeNumber of seconds after which a notify payload is sent to check the liveliness of the peer. Additional retries are done as per retransmit interval setting. Zero value disables liveliness checks.
Minimum value = 0
Maximum value = 64999
replaywindowsize<Double>Read-writeIPSec Replay window size for the data traffic.
Minimum value = 0
Maximum value = 16384
ikeretryinterval<Double>Read-writeIKE retry interval for bringing up the connection.
Minimum value = 60
Maximum value = 3600
retransmissiontime<Double>Read-writeThe interval in seconds to retry sending the IKE messages to peer, three consecutive attempts are done with doubled interval after every failure.
Minimum value = 1
Maximum value = 99
perfectforwardsecrecy<String>Read-writeEnable/Disable PFS.
Possible values = ENABLE, DISABLE
responderonly<String>Read-onlyResponder Only config for IKED.
Possible values = YES, NO
builtin<String[]>Read-onlyIndicates that a variable is a built-in (SYSTEM INTERNAL) type.
Possible values = MODIFIABLE, DELETABLE, IMMUTABLE, PARTITION_ALL
__count<Double>Read-onlycount parameter

Operations

(click to see Properties)

ADD| DELETE| GET (ALL)| GET| COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<netscaler-ip-address>/nitro/v1/config/ipsecprofile

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"ipsecprofile":{
<b>"name":<String_value>,
</b>"ikeversion":<String_value>,
"encalgo":<String[]_value>,
"hashalgo":<String[]_value>,
"lifetime":<Double_value>,
"psk":<String_value>,
"publickey":<String_value>,
"privatekey":<String_value>,
"peerpublickey":<String_value>,
"livenesscheckinterval":<Double_value>,
"replaywindowsize":<Double_value>,
"ikeretryinterval":<Double_value>,
"retransmissiontime":<Double_value>,
"perfectforwardsecrecy":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL:http://<netscaler-ip-address>/nitro/v1/config/ipsecprofile/name_value<String>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL:http://<netscaler-ip-address>/nitro/v1/config/ipsecprofile

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/ipsecprofile?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<netscaler-ip-address>/nitro/v1/config/ipsecprofile?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of ipsecprofile resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http://<netscaler-ip-address>/nitro/v1/config/ipsecprofile?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<netscaler-ip-address>/nitro/v1/config/ipsecprofile?pagesize=#no;pageno=#no

Use this query-parameter to get the ipsecprofile resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "ipsecprofile": [ {
"name":<String_value>,
"ikeversion":<String_value>,
"encalgo":<String[]_value>,
"hashalgo":<String[]_value>,
"lifetime":<Double_value>,
"livenesscheckinterval":<Double_value>,
"replaywindowsize":<Double_value>,
"retransmissiontime":<Double_value>,
"psk":<String_value>,
"publickey":<String_value>,
"privatekey":<String_value>,
"peerpublickey":<String_value>,
"ikeretryinterval":<Double_value>,
"perfectforwardsecrecy":<String_value>,
"responderonly":<String_value>,
"builtin":<String[]_value>
}]}

get

URL:http://<netscaler-ip-address>/nitro/v1/config/ipsecprofile/name_value<String>

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/ipsecprofile/name_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<netscaler-ip-address>/nitro/v1/config/ipsecprofile/name_value<String>?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "ipsecprofile": [ {
"name":<String_value>,
"ikeversion":<String_value>,
"encalgo":<String[]_value>,
"hashalgo":<String[]_value>,
"lifetime":<Double_value>,
"livenesscheckinterval":<Double_value>,
"replaywindowsize":<Double_value>,
"retransmissiontime":<Double_value>,
"psk":<String_value>,
"publickey":<String_value>,
"privatekey":<String_value>,
"peerpublickey":<String_value>,
"ikeretryinterval":<Double_value>,
"perfectforwardsecrecy":<String_value>,
"responderonly":<String_value>,
"builtin":<String[]_value>
}]}

count

URL:http://<netscaler-ip-address>/nitro/v1/config/ipsecprofile?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "ipsecprofile": [ { "__count": "#no"} ] }