Download full document:

ipsecalgprofile

Configuration for IPSEC ALG profile resource.

Properties

(click to see Operations)

NameData TypePermissionsDescription
name<String>Read-writeThe name of the ipsec alg profile.
Minimum length = 1
Maximum length = 32
ikesessiontimeout<Double>Read-writeIKE session timeout in minutes.
Default value: 60
Minimum value = 1
Maximum value = 1440
espsessiontimeout<Double>Read-writeESP session timeout in minutes.
Default value: 60
Minimum value = 1
Maximum value = 1440
espgatetimeout<Double>Read-writeTimeout ESP in seconds as no ESP packets are seen after IKE negotiation.
Default value: 30
Minimum value = 3
Maximum value = 1200
connfailover<String>Read-writeMode in which the connection failover feature must operate for the IPSec Alg. After a failover, established UDP connections and ESP packet flows are kept active and resumed on the secondary appliance. Recomended setting is ENABLED.
Default value: ENABLED
Possible values = ENABLED, DISABLED
__count<Double>Read-onlycount parameter

Operations

(click to see Properties)

ADD| UPDATE| UNSET| DELETE| GET (ALL)| GET| COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<netscaler-ip-address>/nitro/v1/config/ipsecalgprofile

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"ipsecalgprofile":{
<b>"name":<String_value>,
</b>"ikesessiontimeout":<Double_value>,
"espsessiontimeout":<Double_value>,
"espgatetimeout":<Double_value>,
"connfailover":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL:http://<netscaler-ip-address>/nitro/v1/config/ipsecalgprofile

HTTP Method:PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"ipsecalgprofile":{
<b>"name":<String_value>,
</b>"ikesessiontimeout":<Double_value>,
"espsessiontimeout":<Double_value>,
"espgatetimeout":<Double_value>,
"connfailover":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL:http://<netscaler-ip-address>/nitro/v1/config/ipsecalgprofile?action=unset

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"ipsecalgprofile":{
<b>"name":<String_value>,
</b>"ikesessiontimeout":true,
"espsessiontimeout":true,
"espgatetimeout":true,
"connfailover":true
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL:http://<netscaler-ip-address>/nitro/v1/config/ipsecalgprofile/name_value<String>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL:http://<netscaler-ip-address>/nitro/v1/config/ipsecalgprofile

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/ipsecalgprofile?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<netscaler-ip-address>/nitro/v1/config/ipsecalgprofile?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of ipsecalgprofile resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http://<netscaler-ip-address>/nitro/v1/config/ipsecalgprofile?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<netscaler-ip-address>/nitro/v1/config/ipsecalgprofile?pagesize=#no;pageno=#no

Use this query-parameter to get the ipsecalgprofile resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "ipsecalgprofile": [ {
"name":<String_value>,
"ikesessiontimeout":<Double_value>,
"espsessiontimeout":<Double_value>,
"espgatetimeout":<Double_value>,
"connfailover":<String_value>
}]}

get

URL:http://<netscaler-ip-address>/nitro/v1/config/ipsecalgprofile/name_value<String>

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/ipsecalgprofile/name_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<netscaler-ip-address>/nitro/v1/config/ipsecalgprofile/name_value<String>?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "ipsecalgprofile": [ {
"name":<String_value>,
"ikesessiontimeout":<Double_value>,
"espsessiontimeout":<Double_value>,
"espgatetimeout":<Double_value>,
"connfailover":<String_value>
}]}

count

URL:http://<netscaler-ip-address>/nitro/v1/config/ipsecalgprofile?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "ipsecalgprofile": [ { "__count": "#no"} ] }