Download full document:

tmsessionaction

Configuration for TM session action resource.

Properties

(click to see Operations)

NameData TypePermissionsDescription
name<String>Read-writeName for the session action. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after a session action is created.

The following requirement applies only to the NetScaler CLI:
If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my action" or 'my action').
Minimum length = 1
sesstimeout<Double>Read-writeSession timeout, in minutes. If there is no traffic during the timeout period, the user is disconnected and must reauthenticate to access intranet resources.
Minimum value = 1
defaultauthorizationaction<String>Read-writeAllow or deny access to content for which there is no specific authorization policy.
Possible values = ALLOW, DENY
sso<String>Read-writeUse single sign-on (SSO) to log users on to all web applications automatically after they authenticate, or pass users to the web application logon page to authenticate to each application individually.
Default value: OFF
Possible values = ON, OFF
ssocredential<String>Read-writeUse the primary or secondary authentication credentials for single sign-on (SSO).
Possible values = PRIMARY, SECONDARY
ssodomain<String>Read-writeDomain to use for single sign-on (SSO).
Minimum length = 1
Maximum length = 32
httponlycookie<String>Read-writeAllow only an HTTP session cookie, in which case the cookie cannot be accessed by scripts.
Possible values = YES, NO
kcdaccount<String>Read-writeKerberos constrained delegation account name.
Minimum length = 1
Maximum length = 32
persistentcookie<String>Read-writeEnable or disable persistent SSO cookies for the traffic management (TM) session. A persistent cookie remains on the user device and is sent with each HTTP request. The cookie becomes stale if the session ends. This setting is overwritten if a traffic action sets persistent cookie to OFF.
Note: If persistent cookie is enabled, make sure you set the persistent cookie validity.
Possible values = ON, OFF
persistentcookievalidity<Double>Read-writeInteger specifying the number of minutes for which the persistent cookie remains valid. Can be set only if the persistent cookie setting is enabled.
Minimum value = 1
homepage<String>Read-writeWeb address of the home page that a user is displayed when authentication vserver is bookmarked and used to login.
builtin<String[]>Read-onlyIndicates that a variable is a built-in (SYSTEM INTERNAL) type.
Possible values = MODIFIABLE, DELETABLE, IMMUTABLE, PARTITION_ALL
__count<Double>Read-onlycount parameter

Operations

(click to see Properties)

ADD| DELETE| UPDATE| UNSET| GET (ALL)| GET| COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<netscaler-ip-address>/nitro/v1/config/tmsessionaction

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"tmsessionaction":{
<b>"name":<String_value>,
</b>"sesstimeout":<Double_value>,
"defaultauthorizationaction":<String_value>,
"sso":<String_value>,
"ssocredential":<String_value>,
"ssodomain":<String_value>,
"httponlycookie":<String_value>,
"kcdaccount":<String_value>,
"persistentcookie":<String_value>,
"persistentcookievalidity":<Double_value>,
"homepage":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL:http://<netscaler-ip-address>/nitro/v1/config/tmsessionaction/name_value<String>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL:http://<netscaler-ip-address>/nitro/v1/config/tmsessionaction

HTTP Method:PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"tmsessionaction":{
<b>"name":<String_value>,
</b>"sesstimeout":<Double_value>,
"defaultauthorizationaction":<String_value>,
"sso":<String_value>,
"ssocredential":<String_value>,
"ssodomain":<String_value>,
"kcdaccount":<String_value>,
"httponlycookie":<String_value>,
"persistentcookie":<String_value>,
"persistentcookievalidity":<Double_value>,
"homepage":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL:http://<netscaler-ip-address>/nitro/v1/config/tmsessionaction?action=unset

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"tmsessionaction":{
<b>"name":<String_value>,
</b>"sesstimeout":true,
"defaultauthorizationaction":true,
"sso":true,
"ssocredential":true,
"ssodomain":true,
"kcdaccount":true,
"httponlycookie":true,
"persistentcookie":true,
"persistentcookievalidity":true,
"homepage":true
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL:http://<netscaler-ip-address>/nitro/v1/config/tmsessionaction

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/tmsessionaction?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<netscaler-ip-address>/nitro/v1/config/tmsessionaction?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of tmsessionaction resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http://<netscaler-ip-address>/nitro/v1/config/tmsessionaction?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<netscaler-ip-address>/nitro/v1/config/tmsessionaction?pagesize=#no;pageno=#no

Use this query-parameter to get the tmsessionaction resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "tmsessionaction": [ {
"name":<String_value>,
"sesstimeout":<Double_value>,
"defaultauthorizationaction":<String_value>,
"sso":<String_value>,
"ssocredential":<String_value>,
"ssodomain":<String_value>,
"kcdaccount":<String_value>,
"httponlycookie":<String_value>,
"persistentcookie":<String_value>,
"persistentcookievalidity":<Double_value>,
"homepage":<String_value>,
"builtin":<String[]_value>
}]}

get

URL:http://<netscaler-ip-address>/nitro/v1/config/tmsessionaction/name_value<String>

Query-parameters:

attrs

http://<netscaler-ip-address>/nitro/v1/config/tmsessionaction/name_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<netscaler-ip-address>/nitro/v1/config/tmsessionaction/name_value<String>?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "tmsessionaction": [ {
"name":<String_value>,
"sesstimeout":<Double_value>,
"defaultauthorizationaction":<String_value>,
"sso":<String_value>,
"ssocredential":<String_value>,
"ssodomain":<String_value>,
"kcdaccount":<String_value>,
"httponlycookie":<String_value>,
"persistentcookie":<String_value>,
"persistentcookievalidity":<Double_value>,
"homepage":<String_value>,
"builtin":<String[]_value>
}]}

count

URL:http://<netscaler-ip-address>/nitro/v1/config/tmsessionaction?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "tmsessionaction": [ { "__count": "#no"} ] }