Download full document:

0x850 ERRORS

0x850 ERRORS

Error CodeError Code(Decimal)Error Code(Hex)Error Message
NSERR_MONITOR_INTERVAL21280x850Monitor interval must be greater than response timeout
NSERR_MONITOR_DESTIP21290x851Destination IP must be specified for transparent, tunneled or tos monitors
NSERR_MONITOR_CODES21300x852Too many response codes, only 16 allowed
NSERR_MONITOR_REF21310x853Monitor must be unbound before it can be deleted
NSERR_MONITOR_BUILTIN21320x854Built-in monitors cannot be deleted
NSERR_MONITOR_BOUND21330x855The monitor is already bound to the service
NSERR_MONITOR_TYPE21340x856Invalid monitor type
NSERR_MONITOR_LOCAL21350x857Monitor object cannot be bound to local service
NSERR_TIMEOUT_RANGE21360x858Timeout value out of range; enter a value between 2 minutes and 1440 minutes
NSERR_INVALIDHASHLEN21370x859Hashlength should be between 1 and 4096 (inclusive)
NSERR_NOTAUTHORIZED21380x85ANot authorized to execute this command
NSERR_MONITOR_DEFAULT21390x85BNo operations allowed with the default monitor
NSERR_MONITOR_LDNS_ADD_PERM21400x85CCannot add monitor of ldns type
NSERR_MONITOR_LDNS_BIND_PERM21410x85DCannot bind ldns monitor
NSERR_BACKUP_LOOP21440x860The VIP is already a backup in the chain
NSERR_SECURE_UDP21540x86ASecure mode not supported for this protocol
NSERR_MONITOR_WRONG_TYPE21550x86BExisting monitor is of different type than given
NSERR_LRTM_PERM21560x86CEnabling LRTM on this monitor type is not permitted
NSERR_MONITOR_SCRIPTNAME21570x86DInvalid script name for user monitor
NSERR_MONITOR_DISPATCHERIP21590x86FInvalid dispatcher IP for user monitor
NSERR_MONITOR_USERPERM21600x870Operation not permitted for a user monitor
NSERR_MONITOR_NOCODES21610x871A response code is required for this monitor type
NSERR_INVAL_MON21620x872Attempt to bind invalid monitor type
NSERR_TYPE_EXISTS21630x873Only one monitor of this type can be bound to a service
NSERR_MONITOR_UNBIND_DEFAULT21640x874Default monitor cannot be unbound from a service
NSERR_MONITOR_BIND_DEFAULT21650x875Default monitor cannot be bound explicitly to a service
NSERR_MONITOR_DISABLE_DEFAULT21660x876Default monitor cannot be disabled or enabled
NSERR_DRTM_PERM21670x877Dynamic response timeout is not permitted on this monitor type
NSERR_MON_DTRM_DEVIATION21680x878Response timeout of the monitor has been changed to interval - 1
NSERR_MONITOR_INVALID_VALUE21690x879Time parameter must be a multiple of 10
NSERR_MONITOR_NOT_BOUND21700x87AMonitor not bound to service
NSERR_INVALID_MONITOR21710x87BMonitor does not exist
NSERR_MONITOR_NO_SUCHIPADDR21720x87CSome IP addresses were not present
NSERR_MONITOR_SCRIPT_ARG_SIZE21730x87DCombined argument size too long
NSERR_METRICTABLE_NOENT21740x87EMetric table does not exist
NSERR_METRICTABLE_EXIST21750x87FMetric table exists
NSERR_DEL_METRICTABLE_PERMANENT21760x880Permanent metric table cannot be deleted
NSERR_MAX_METRIC_BINDING21770x881Maximum of 10 SNMP type metric can be bound to the monitor
NSERR_METRIC_NOENT21780x882Metric does not exist
NSERR_METRIC_EXISTS21790x883Metric exists
NSERR_OID_EXIST21800x884SNMP OID exists
NSERR_SNMP_OID_INVAL21810x885SNMP OID is invalid
NSERR_METRICTABLE_RDONLY21820x886No operations allowed on read only metric table
NSERR_THRESHOLD_ZERO21830x887This metric will not be used for CUSTOM LB as its threshold value is zero
NSERR_LDAP_MONITOR_INCOMPLETE21840x888bindDN or baseDN must be specified before LDAP monitor can be used
NSERR_MYSQL_MONITOR_INCOMPLETE21850x889userName or database must be specified before MYSQL monitor can be used
NSERR_POP3_MONITOR_INCOMPLETE21860x88AuserName must be specified before POP3 monitor can be used
NSERR_NNTP_MONITOR_INCOMPLETE21870x88Bgroup must be specified before NNTP monitor can be used
NSERR_FTPEXTENDED_MONITOR_INCOMPLETE21880x88CfileName must be specified before FTP-EXTENDED monitor can be used
NSERR_SNMP_MONITOR_INCOMPLETE21890x88DsnmpOID or snmpCommunity must be specified before SNMP monitor can be used
NSERR_CITRIX_XML_SERVICE21900x88Eapplication must be specified before CITRIX-XML-SERVICE monitor can be used
NSERR_CITRIX_WEB_INTERFACE21910x88FsitePath must be specified before CITRIX-WEB-INTERFACE monitor can be used
NSERR_LDNS_MON_CANT_DISABLE21920x890Atleast one ldns monitor needs to be enabled
NSERR_RES_RETRY_ON_IP_SVR21930x891Resolve retry can be set only on domain based servers
NSERR_IP_ON_DBS_SVR21940x892IP Address cannot be set on a domain based server
NSERR_MONITOR_FAILURERETRIES21960x894Monitor retries must be greater than monitor failureRetries
NSERR_MONITOR_IP21980x896The server/monitor destination ip address is not appropriate for this monitor
NSERR_MONITOR_SUBNET21990x897The server/monitor destination ip address should be in a directly connected subnet for this monitor
NSERR_MONITOR_STATIC22000x898A static/permanent MAC entry is configured for the server/monitor destination ip address
NSERR_TOSID_NOT_SET22010x899Tos id must be specified for tos enabled vserver/monitor
NSERR_FAILURERETRIES_NOT_SUPPORTED22020x89AThe failure retries is not supported for this monitor type. Resetting the value of failure retries to 0(Disabled).
NSERR_SUCCESSRETRIES_NOT_SUPPORTED22030x89BThe success retries is not supported for this monitor type. Resetting the value of success entries to 1(Disabled).
NSERR_SETVS_INVAL_MYSQLPARAMS22040x89CThis parameter is only applicable to a MYSQL vserver.
NSERR_SETVS_INVAL_PROTOCOL_PARAMS22050x89DThe parameters are only applicable to HTTP or SSL vservers.
NSERR_SETVS_INVAL_PROTOCOLS_PARAMS22060x89EThe parameters are only applicable to HTTP , SSL or RTSP vservers.
NSERR_DDC_VALIDATE_CRED_REQUIRED22070x89FUsername, password and ddc domain are required for Xen Desktop monitor\\n
NSERR_CITRIX_WI_EXTENDED_MONITOR_INCOMPLETE22080x8A0userName, password, sitepath and domain must be specified before CITRIX-WI-EXTENDED monitor can be used
NSERR_SETVS_INVAL_MSSQLPARAMS22090x8A1This parameter is only applicable to a MSSQL vserver.
NSERR_DRTM_MON_BOUNDED_SVC22100x8A2In a cluster system, deviation cant be set/unset on any already bound monitor.
NSERR_MONITOR_RESP_TO_THRESH22110X8A3Response timeout threshold is rounded off to nearest multiple of 10 less than the given value
NSERR_PASSIVE_ON_LOAD_ONLY22120x8A4PASSIVE option can be set only on LOAD monitors.
NSERR_SETVS_INVAL_ORACLEPARAMS22130x8A5This parameter is only applicable to a ORACLE vserver.
NSERR_RADIUS_ACCOUNTING_MONITOR_INCOMPLETE22140x8A6Secret key must be specified before RADIUS ACCOUNTING monitor can be used
NSERR_MONITOR_SCRIPT_ARG_CNT22150x8A7Too many script arguments
NSERR_INVALID_DBSLB_BIND22160x8A8More than one bind not possible on one service for DBSLB
NSERR_USER_NONETPROF22170x8A9Netprofile cannot be set on scriptable monitors, so ignoring the configured netprofile for this monitor.
NSERR_MONITOR_NO_SSLPROFILE_BOUND22180x8AANo SSL profile is attached to monitor. Attach SSL profile first
NSERR_DIAMETER_MONITOR_INCOMPLETE35500xDDEoriginHost and originRealm configuration is missing