Download full document:

PARTITION ERRORS

PARTITION ERRORS

Error CodeError Code(Decimal)Error Code(Hex)Error Message
NSERR_MAX_PARTITION27520xac0Maximum allowed partition limit reached
NSERR_PARTITION_NAME_EXIST27530xac1Partition name already exist
NSERR_NO_PARTITION27550xac3Partition does not exist
NSERR_DEL_PARTITION_BUSY27560xac4Partition is busy, cant delete
NSERR_DEL_PARTITION_INUSE27570xac5Partition is in use, cant delete
NSERR_NO_DEL_DFLT_PARTITION27580xac6Default Partition cant be delete
NSERR_RM_PARTITION_CONFIRM27590xac7Are you sure you want to remove partition (Y/N)? [N]:
NSERR_NOT_SUPPORTFORPARTITION27600xac8This feature is not supported on partition
NSERR_AP_CONFIG_NOT_ALLOWED27610xac9This configuration option is not supported on non-default partition
NSERR_VLAN_BDGGRP_PARTITION_EXIST27620xacaVLAN or VXLAN or BridgeGroup bound to a partition can not be deleted.
NSERR_AP_DEFVLAN27630xacbDefault VLAN cannot be bound/unbound to/from a partition.
NSERR_VLAN_BDGGRP_PARTITION27640xaccThe specified VLAN or VXLAN or BridgeGroup is bound to other partition.
NSERR_PQ_ARG_UNSUPPORTED_PARTITION27650xacdPQ feature is not supported in non-default partition.
NSERR_SC_ARG_UNSUPPORTED_PARTITION27660xaceSC feature is not supported in non-default partition.
NSERR_MAX_PARTITIONS_ZEBOS27670xacfMaximum allowed partition limit for routing reached
NSERR_AP_SYNCVLAN27690xad1SYNC VLAN cannot be bound/unbound to/from a partition.
NSERR_AP_VLAN_BDG_EXIST27700xad2The specified VLAN cannot be bound to a partition because it is bound to a bridge group.
NSERR_AP_SDXMGMTVLAN27710xad3The SDX management VLAN cannot be bound/unbound to/from a partition.
NSERR_AP_DEFAULT_PARTITION_CONFIG27720xad4This configuration is allowed only from the default partition.
NSERR_AP_MEM_DECR27730xad5Partitions memory limit cannot be reduced less than currently used memory
NSERR_AP_MISMATCH27740xad6The specified entity is configured in some other partition.
NSERR_AP_PVID_IF_NOT_ALLOWED27750xad7The specified VLAN cannot be configured as untagged member of interface because it is bound to partition.
NSERR_AP_VLAN_BINDING_NOT_ALLOWED27760xad8The specified VLAN cannot be bound to a partition because it is configured as untagged member of interface.
NSERR_AP_NOT_SUPPORTFORSHAREDVLAN27770xad9This feature is not supported on shared vlan.
NSERR_AP_SHAREDVLAN_CONFIG_NOT_ALLOWED_INCLUSTER27780xadaConfiguring vlan as shared is not supported on cluster.
NSERR_AP_SHAREDVLAN_BDG27790xadbShared vlan cannot be bound/unbound to/from a bridge group.
NSERR_AP_SHAREDVLAN_TD27800xadcShared vlan cannot be bound/unbound to/from a Traffic domain.
NSERR_AP_MCAST_PMAC27810xaddPartition MAC address cannot have multicast bit set.
NSERR_AP_VMAC_EXIST27820xadeAnother admin-partition with the same partition MAC address exist.
NSERR_AP_VMAC_BUSY27830xadfPartitions MAC address can not be unset when shared vlans are bound to it.
NSERR_AP_XS_CONN_FAILED27840xae0Unable to communicate with the XenStore.
NSERR_AP_XS_NO_VMAC27850xae1No partition MAC address is configured for the VPX on SDX.
NSERR_AP_XS_VMAC_NOTEXIST27860xae2The specified partition MAC address is not configured for the VPX on SDX.
NSERR_AP_XS_VMAC_EXHAUSTED27870xae3All partition MAC addresses configured for the VPX on SDX are in use.
NSERR_AP_ARP_VLAN_NOT_SPECIFIED27880xae4VLAN must be specified while adding ARP entry within partition.
NSERR_AP_SHAREDVLAN_PART_EXIST27890xae5This VLAN already bound to the specified partition.
NSERR_PARTITION_ID_EXIST27900xae6Partition-id is already in use by another partition.
NSERR_SYNCNSVLAN_AP27910xae7VLAN bound to Admin Partition cannot be configured as SYNC/NS VLAN.
NSERR_AP_NSVLAN27920xae8NSVLAN cannot be bound to Admin Partition.
NSERR_VXLAN_VLAN_DIFF_PARTITION27990xaefVXLAN and VLAN belong to different partitions.
NSERR_AP_VXLAN_TUNNEL_NOT_ALLOWED28000xaf0IPtunnel of type vxlan cannot be configured in non default partition
NSERR_VXLAN_CONFIG_INPART28010xaf1This vxlan config not supported in non-default partition.
NSERR_VXLAN_OTHER_PARTITION28020xaf2Specified vxlan is already bound to some other partition.
NSERR_VXLAN_VLAN_BIND28030xaf3When vxlan extends vlan, these operations should be done on vlan
NSERR_VXLAN_IP_BINDING_CURPART28040xaf4IP binding to vxlan should be done in vxlan partition alone
NSERR_VXLAN_BOUNDTO_PARTITION28050xaf5Specified vxlan is already bound to the partition.
NSERR_DYNROUTING_PARTITION28060xaf6Dynamic Routing should be enabled or disabled in vlan/vxlan partition
NSERR_AP_SHAREDVLAN_VXLAN28070xaf7Shared vlan cannot be bound/unbound to/from a vxlan.
NSERR_AP_VLAN_VXLAN_EXIST28080xaf8The specified VLAN cannot be shared to a partition because it is extended by a vxlan .
NSERR_AP_STATIC_ARP_ND6_VXLAN_NOT_ALLOWED28090xaf9Static arp/nd6 entries cannot be added with vxlan in non default partition
NSERR_AP_MEM_MIN_LIMIT28100xafaPartitions memory limit cannot be less than 5MB
NSERR_AP_BDGGRP_BINDING_NOT_ALLOWED28110xafbThe specified BridgeGroup cannot be bound to a partition because one of its member VLAN is configured as untagged member of interface.
NSERR_AP_NOT_LOCAL_ADMIN_PMAC28120xafcLocal-admin bit must be set for Partition MAC address.
NSERR_AP_NOMEM28130xafdCannot allocate memory. The total memory budgeted across all partitions will exceed the system capacity.