-
-
-
-
-
Set-BrokerApplication
-
-
-
-
-
-
-
-
-
-
-
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
Set-BrokerApplication
Changes the settings of an application to the value specified in the command.
Syntax
Set-BrokerApplication
[-InputObject] <Application[]>
[-PassThru]
[-BrowserName <String>]
[-ClientFolder <String>]
[-CommandLineArguments <String>]
[-CommandLineExecutable <String>]
[-CpuPriorityLevel <CpuPriorityLevel>]
[-Description <String>]
[-DoNotEnumerate <Boolean>]
[-Enabled <Boolean>]
[-HomeZoneOnly <Boolean>]
[-HomeZoneUid <Guid>]
[-IconFromClient <Boolean>]
[-IconUid <Int32>]
[-IgnoreUserHomeZone <Boolean>]
[-LocalLaunchDisabled <Boolean>]
[-MaxPerMachineInstances <Int32>]
[-MaxPerUserInstances <Int32>]
[-MaxTotalInstances <Int32>]
[-PackagedApplicationVisibility <String>]
[-PublishedName <String>]
[-SecureCmdLineArgumentsEnabled <Boolean>]
[-ShortcutAddedToDesktop <Boolean>]
[-ShortcutAddedToStartMenu <Boolean>]
[-StartMenuFolder <String>]
[-UserFilterEnabled <Boolean>]
[-Visible <Boolean>]
[-WaitForPrinterCreation <Boolean>]
[-WorkingDirectory <String>]
[-LoggingId <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Set-BrokerApplication
[-Name] <String>
[-PassThru]
[-BrowserName <String>]
[-ClientFolder <String>]
[-CommandLineArguments <String>]
[-CommandLineExecutable <String>]
[-CpuPriorityLevel <CpuPriorityLevel>]
[-Description <String>]
[-DoNotEnumerate <Boolean>]
[-Enabled <Boolean>]
[-HomeZoneOnly <Boolean>]
[-HomeZoneUid <Guid>]
[-IconFromClient <Boolean>]
[-IconUid <Int32>]
[-IgnoreUserHomeZone <Boolean>]
[-LocalLaunchDisabled <Boolean>]
[-MaxPerMachineInstances <Int32>]
[-MaxPerUserInstances <Int32>]
[-MaxTotalInstances <Int32>]
[-PackagedApplicationVisibility <String>]
[-PublishedName <String>]
[-SecureCmdLineArgumentsEnabled <Boolean>]
[-ShortcutAddedToDesktop <Boolean>]
[-ShortcutAddedToStartMenu <Boolean>]
[-StartMenuFolder <String>]
[-UserFilterEnabled <Boolean>]
[-Visible <Boolean>]
[-WaitForPrinterCreation <Boolean>]
[-WorkingDirectory <String>]
[-LoggingId <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Description
The Set-BrokerApplication cmdlet changes the value of one or more properties of an application, such as its CpuPriorityLevel or its CommandLineArguments, to the value specified in the command.
This cmdlet lets you change only the settings of the Application object, and not the relationships to other objects. For instance, it does not let you change which users can access this application, or change which desktop groups this application is published to. To do this, you need to remove the existing association, and then add a new association. The following example shows how to change the desktop group that an application is associated with from $group1 to $group2:
Remove-BrokerApplication -DesktopGroup $group1
Add-BrokerApplication -DesktopGroup $group2
You can change properties of HostedOnDesktop, InstalledOnClient and PublishedContent applications but it is not possible to change the ApplicationType. Also, the Name cannot be changed using this cmdlet; to do this, use the Rename-BrokerApplication cmdlet.
Examples
EXAMPLE 1
Modifies the application that has a Name of “Notepad” so that its description reads Windows Notepad.
Set-BrokerApplication -Name "Notepad" -Description 'Windows Notepad'
<!--NeedCopy-->
EXAMPLE 2
First gets the application with a BrowserName of “Calculator”, then modifies that application (by supplying the application object in the first position) so that it is disabled for users.
$app = Get-BrokerApplication -BrowserName "Calculator"
Set-BrokerApplication -InputObject $app -Enabled $false
<!--NeedCopy-->
Parameters
-InputObject
Specifies the application to modify. The Uid of the application can also be substituted for the object.
| Type: | Application[] |
| Position: | 2 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True (ByValue) |
| Accept wildcard characters: | False |
-Name
Specifies the name of the application to be modified.
| Type: | String |
| Position: | 2 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | True |
-PassThru
This cmdlet does not generate any output, unless you use the PassThru parameter, in which case it returns the affected record.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-BrowserName
Specifies the BrowserName of the application.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClientFolder
Specifies the folder that the application belongs to as the user sees it. This is the application folder displayed in the Citrix Online Plug-in, in Web Services, and also in the user’s start menu. Subdirectories can be specified with ‘' character. The following special characters are not allowed: / * ? < > | “ :. Note that this property cannot be set for applications of type InstalledOnClient.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CommandLineArguments
Specifies the command-line arguments to use when launching the executable. This setting is ignored for applications of type PublishedContent.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CommandLineExecutable
Specifies the name of the executable file to launch.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CpuPriorityLevel
Specifies the CPU priority for the launched executable. Valid values are: Low, BelowNormal, Normal, AboveNormal, and High. Note that this property cannot be set for applications of type InstalledOnClient.
| Type: | CpuPriorityLevel |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Description
Specifies the description of the application.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DoNotEnumerate
Specifies whether or not this application is returned to the user during enumeration.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Enabled
Specifies whether or not this application can be launched.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-HomeZoneOnly
Specifies whether if the preferred zone for launching the application is its home zone but no machine is available from that zone then the launch fails.
This can only be set if the application has a home zone preference specified.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-HomeZoneUid
Specifies any home zone preference used when launching this application.
| Type: | Guid |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IconFromClient
Specifies if the app icon should be retrieved from the application on the client. This is reserved for possible future use, and all applications of type HostedOnDesktop cannot set or change this value.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IconUid
Specifies which icon to use for this application. This application is visible both to the administrator (in the consoles) and also to the user. If no icon is specified, then a generic built-in application icon is used.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IgnoreUserHomeZone
Specifies that when launching the application and the user has a home zone specified then the user’s home zone preference should be ignored.
This can only be set if the application does not itself have a home zone preference specified.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-LocalLaunchDisabled
When launching a published application from within a published desktop, do not launch the application in that desktop session.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MaxPerMachineInstances
Specifies the maximum allowed concurrently running instances of the application that an individual machine can have. A value of zero allows unlimited usage subject to any site-wide limit.
Reducing the limit below the currently running number of instances does not cause any of those to be stopped.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MaxPerUserInstances
Specifies the maximum allowed concurrently running instances of the application that an individual user can have. A value of zero allows unlimited usage subject to any site-wide limit.
Reducing the limit below the currently running number of instances does not cause any of those to be stopped.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MaxTotalInstances
Specifies the maximum allowed total of concurrently running instances of the application in the site. A value of zero allows unlimited usage.
Reducing the limit below the currently running number of instances does not cause any of those to be stopped.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PackagedApplicationVisibility
Specifies the required visibility of the packaged application
| Type: | String |
| Accepted values: | Desktop, None, Workspace, WorkspaceAndDesktop |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PublishedName
Specifies the name seen by end users who have access to this application.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SecureCmdLineArgumentsEnabled
Specifies whether the command-line arguments should be secured. This is reserved for possible future use, and all applications of type HostedOnDesktop can only have this value set to true.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ShortcutAddedToDesktop
Specifies whether or not a shortcut to the application should be placed on the user device.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ShortcutAddedToStartMenu
Specifies whether a shortcut to the application should be placed in the user’s start menu on their user device.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StartMenuFolder
Specifies the name of the start menu folder that holds the application shortcut (if any). This is valid only for the Citrix Online Plug-in. Subdirectories can be specified with ‘' character. The following special characters are not allowed: / * ? < > | “ :.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserFilterEnabled
Specifies whether the application’s user filter is enabled or disabled. Where the user filter is enabled, the application is only visible to users who appear in the filter (either explicitly or by virtue of group membership).
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Visible
Specifies whether or not this application is visible to users. Note that it’s possible for an application to be disabled and still visible.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WaitForPrinterCreation
Specifies whether or not the session waits for the printers to be created before allowing the end-user to interact with the session. Note that this property cannot be set for applications of type InstalledOnClient.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WorkingDirectory
Specifies from which working directory the executable is launched from. This setting is ignored for applications of type PublishedContent.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-LoggingId
Specifies the identifier of the high level operation that this cmdlet call forms a part of. Desktop Studio and Desktop Director typically create High Level Operations. PowerShell scripts can also wrap a series of cmdlet calls in a High Level Operation by way of the Start-LogHighLevelOperation and Stop-LogHighLevelOperation cmdlets.
| Type: | Guid |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
CitrixCommonParameters
This cmdlet supports the common Citrix parameters: -AdminAddress, -AdminClientIP, -BearerToken, -TraceParent, -TraceState and -VirtualSiteId. For more information, see about_CitrixCommonParameters.
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Citrix.Broker.Admin.SDK.Application, or depends on parameter
You can pipe the application to be added to Set-BrokerApplication. You can also pipe some of the other parameters by name.
Outputs
None or Citrix.Broker.Admin.SDK.Application
This cmdlet does not generate any output, unless you use the PassThru parameter, in which case it generates a Citrix.Broker.Admin.SDK.Application object.
Related Links
Share
Share
In this article
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.