Citrix Daas SDK

Publish-ProvMasterVMImage

November 15, 2023

Contributed by:

Update the master image associated with the provisioning scheme.

Syntax

Publish-ProvMasterVMImage [-ProvisioningSchemeName] <String> -MasterImageVM <String> [-VhdTemplateSource <String>] [-VhdResultDestination <String>] [-AppScanResultsFile <String>] [-FunctionalLevel <String>] [-MasterImageNote <String>] [-RunAsynchronously] [-PurgeJobOnSuccess] [-DoNotStoreOldImage] [-LoggingId <Guid>] [-BearerToken <String>] [-AdminClientIP <String>] [-TraceParent <String>] [-TraceState <String>] [-VirtualSiteId <String>] [-AdminAddress <String>] [<CommonParameters>]

Publish-ProvMasterVMImage -MasterImageVM <String> -ProvisioningSchemeUid <Guid> [-VhdTemplateSource <String>] [-VhdResultDestination <String>] [-AppScanResultsFile <String>] [-FunctionalLevel <String>] [-MasterImageNote <String>] [-RunAsynchronously] [-PurgeJobOnSuccess] [-DoNotStoreOldImage] [-LoggingId <Guid>] [-BearerToken <String>] [-AdminClientIP <String>] [-TraceParent <String>] [-TraceState <String>] [-VirtualSiteId <String>] [-AdminAddress <String>] [<CommonParameters>]

Publish-ProvMasterVMImage -ProvisioningSchemeName <String> [-DoNotStoreOldImage] [-LoggingId <Guid>] [-BearerToken <String>] [-AdminClientIP <String>] [-TraceParent <String>] [-TraceState <String>] [-VirtualSiteId <String>] [-AdminAddress <String>] [<CommonParameters>]

Publish-ProvMasterVMImage -ProvisioningSchemeUid <Guid> [-DoNotStoreOldImage] [-LoggingId <Guid>] [-BearerToken <String>] [-AdminClientIP <String>] [-TraceParent <String>] [-TraceState <String>] [-VirtualSiteId <String>] [-AdminAddress <String>] [<CommonParameters>]
<!--NeedCopy-->

Detailed Description

Provides the ability to update the hard disk image used to create virtual machines. If the provisioning scheme is a ‘CleanOnBoot’ type, then the next time that virtual machines are started, their hard disks are updated to this new image. Regardless of the ‘CleanOnBoot’ type, all new virtual machines created after this command will use this new hard disk image.

A background task will be created to remove the old hard disk copies. You can locate and monitor this task using the Get-ProvTask cmdlet.

A snapshot or VM template is used rather than a VM, so that the content of the hard disk for the provisioning scheme can be easily determined.

As the snapshot or VM template are specified using a path into the Citrix Host Service PowerShell Provider, the Citrix Host Service PowerShell snap-in must also be loaded to use this cmdlet.

The previous hard disk image path is stored into the history (see Get-ProvSchemeMasterVMImageHistory). The data stored in the history allows to do a rollback to revert to the previous hard disk image if required.

Parameters

Name	Description	Required?	Pipeline Input	Default Value
ProvisioningSchemeName	The name of the provisioning scheme to which the hard disk image should be updated.	true	true (ByPropertyName)
MasterImageVM	The path in the hosting unit provider to the VM snapshot or template that will be used. This identifies the hard disk to be used and the default values for the memory and processors. This must be a path to a Snapshot or Template item in the same hosting unit used by the provisioning scheme specified by ProvisioningSchemeName or ProvisioningSchemeUid. Valid paths are of the format
XDHyp:\HostingUnits<HostingUnitName><path><VMName>.vm<SnapshotName>.snapshot XDHyp:\HostingUnits<HostingUnitName><path><TemplateName>.template	true	true (ByPropertyName)
ProvisioningSchemeUid	The unique identifier of the provisioning scheme to which the hard disk image should be updated.	true	false
VhdTemplateSource	A file path to a source VHD template to be used when performing application scanning during image preparation. The presence of this parameter in conjunction with VhdResultDestination implies that application scanning is to be performed	false	false
VhdResultDestination	A file path (including file name) where the VHD disk file containing the results of application scanning should be written.	false	false
AppScanResultsFile	File name to which the results of application scanning should be written.	false	false
FunctionalLevel	The FunctionalLevel of the VDA installed on the given MasterImageVM.	false	false
MasterImageNote	The note of the master image.	false	false
RunAsynchronously	Indicates whether the cmdlet should return before it completes. If specified, the command returns an identifier for the task that was created. You can monitor this task using the get-ProvTask cmdlet.	false	false	false
PurgeJobOnSuccess	Indicates that the task history will be removed from the database once the task completes. This cannot be specified for tasks that run asynchronously.	false	false	false
DoNotStoreOldImage	Indicates that the current image should not be added to the image history list for the provisioning scheme. This is useful when rolling back to a previous image.	false	false
LoggingId	Specifies the identifier of the high-level operation this cmdlet call forms a part of. Citrix Studio and Director typically create high-level operations. PowerShell scripts can also wrap a series of cmdlet calls in a high-level operation by way of the Start-LogHighLevelOperation and Stop-LogHighLevelOperation cmdlets.	false	false
BearerToken	Specifies the bearer token assigned to the calling user	false	false
AdminClientIP	Specifies the Client IP of the calling user	false	false
TraceParent	Specifies the trace parent assigned for internal diagnostic tracing use	false	false
TraceState	Specifies the trace state assigned for internal diagnostic tracing user	false	false
VirtualSiteId	Specifies the virtual site the PowerShell snap-in will connect to.	false	false
AdminAddress	The address of a Citrix Virtual Apps and Desktops controller the PowerShell snap-in will connect to. You can provide this as a host name or an IP address.	false	false	Localhost. Once a value is provided by any cmdlet, this value becomes the default.

Input Type

Citrix.Machinecreation.SdkProvisioningscheme

You can pipe an object containing a parameter called ‘ProvisioningSchemeName’ to Publish-ProvMasterVMImage.

Return Values

SystemGuid

When “RunAsynchronously” is specified, this identifier is returned to provide the task identifier.

System.Management.AutomationPscustomobject

This object provides details of the task run and contains the following information: TaskId <Guid> The identifier for the task that was performed. Active <bool> Indicates whether the task is still processing or is complete. Host <string> The name of the host on which the task is running or was run. DateStarted <DateTime> The date and time when the task was started. Type <Citrix.XDInterServiceTypes.JobType> The type of the task. For publish master image for provisioning scheme tasks this is always “PublishImage”. Metadata <Citrix.MachineCreation.Sdk.Metadata[]> The list of metadata stored against the task. For new tasks this will be empty until metadata is added. WorkflowStatus <System.Workflow.Runtime.WorkflowStatus> Indicates the status of the workflow that is being used to process the task. ProvisioningSchemeName <string> The name of the provisioning scheme associated with the task. ProvisioningSchemeUid <Guid> The unique identifier of the provisioning scheme associated with the task. MasterImage <string> The path of the VM snapshot or template that was used as the master image for the task. IdentityPoolName <string> The name of the identity pool being used for this task. IdentityPoolUid <guid> The unique identifier of the identity pool being used for this task. HostingUnitName <string> The name of the hosting unit being used for this task. HostingUnitUid The unique identifier of the hosting unit being used for this task. MasterImageNote The note of the master image. TaskState <Citrix.DesktopUpdateManager.SDK.NewProvisioningSchemeState> The state of the task. This can be any of the following: Processing Indicates that the task has just begun and has not done anything yet. LocatingResources, Indicates that the workflow is locating resources from other services. HostingUnitNotFound Indicates that the task failed because the required hosting unit could not be located. VirtualMachineSnapshotNotFound Indicates that the task failed because the required snapshot or VM template could not be located. ConsolidatingMasterImage Indicates that the task is consolidating the master image. ReplicatingConsolidatedImageToAllStorage Indicates that the task is replicating the consolidated master image. StoringProvisioningScheme Indicates that the task is storing the provisioning scheme data to the database. Finished Indicates that the task has completed with no errors. ProvisioningSchemeAlreadyExists Indicates that the task failed because a provisioning scheme with the same name already exists. IdentityPoolNotFound Indicates that the task failed because the identity pool specified could not be found. MasterVMImageIsNotPartOfProvisioningSchemeHostingUnit, Indicates that the hosting unit that the master image originated from is not the same hosting unit that the provisioning scheme is defined to use. MasterVmImageIsNotASnapshot Indicates that the task failed because the master VM image path does not refer to a snapshot or a VM template item. ProvisioningSchemeNotFound Could not find a provisioning scheme with the specified name. TaskAlreadyRunningForProvisioningScheme A task for a provisioning scheme with the same name is already running. InvalidMasterVMConfiguration The VM snapshot or VM template specified as the master had an invalid configuration. InvalidMasterVMState The VM snapshot or VM template specified as the master is currently in an invalid state. InsufficientResources Indicates that the task failed because the hypervisor did not have enough resources to complete the task. StorageNotFound Indicates that no associated storage was found in the hosting unit. Canceled Indicates that the task was stopped by user intervention (using Stop-ProvTask). TaskStateInformation <string> Holds string data providing more details about the current task state. TaskProgress <double> The progress of the task 0-100%.

Notes

The cmdlet is associated with a task of type PublishImage, and while active will move through the following operations (CurrentOperation field) ValidatingInputs ConsolidatingMasterImage PreparingMasterImage ReplicatingMasterImage CommittingScheme Only one long-running task per provisioning scheme can be processed at any one time. In the case of failure, the following errors can result.

Error Codes

JobCreationFailed The requested task could not be started.
DatabaseError An error occurred in the service while attempting a database operation.
DatabaseNotConfigured The operation could not be completed because the database for the service is not configured.
ServiceStatusInvalidDb An error occurred in the service while attempting a database operation - communication with the database failed for for various reasons.
WorkflowHostUnavailable The task could not be started because the database connection is inactive.
CommunicationError An error occurred while communicating with the service.
PermissionDenied The user does not have administrative rights to perform this operation.
ConfigurationLoggingError The operation could not be performed because of a configuration logging error.
ExceptionThrown An unexpected error occurred. For more details, see the Windows event logs on the controller being used or Citrix Virtual Apps and Desktops logs.

Examples

Example 1

c:\PS>Publish-ProvMasterVMImage -ProvisioningSchemeName MyScheme -MasterImageVM XDHyp:\HostingUnits\HostUnit1\RhoneCC_baseXP.vm\base.snapshot

TaskId                 : 248f102f-073f-45fe-aea9-1819a6d6dd1f

Active                 : False

Host                   : MyHost

DateStarted            : 17/05/2010 17:37:57

Type                   : PublishImage

Metadata               : {}

WorkflowStatus         : Completed

ProvisioningSchemeUid  : 7585f0de-192e-4847-a6d8-22713c3a2f42

ProvisioningSchemeName : MyScheme

MasterImage            : /RhoneCC_baseXP.vm/base.snapshot

HostingUnitName        : HostUnit1

HostingUnitUid         : 01a4a008-8ce8-4165-ba9c-cdf15a6b0501

MasterImageNote        :

ADIdentityPoolName     :

ADIdentityPoolUid      : 03743136-e43b-4a87-af74-ab71686b3c16

CurrentOperation       :

TaskState              : Finished

TaskStateInformation   :
<!--NeedCopy-->

Description

Updates the master hard disk image for the provisioning Scheme “MyScheme” to use the “base.snapshot” hard disk image.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

Publish-ProvMasterVMImage

November 15, 2023

Contributed by:

November 15, 2023

Contributed by:

Publish-ProvMasterVMImage

Syntax

Detailed Description

Related Commands

Parameters

Input Type

Citrix.Machinecreation.SdkProvisioningscheme

Return Values

SystemGuid

System.Management.AutomationPscustomobject

Notes

Error Codes

Examples

Example 1

Description

In this article