-
Understanding the Citrix Virtual Apps and Desktops Administration Model
-
-
-
-
-
-
-
-
-
-
-
Test-ProvSetProvScheme
-
-
-
-
-
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
Test-ProvSetProvScheme
Test the parameters that can be used for updating provisioning scheme with Set-ProvScheme command
Syntax
Test-ProvSetProvScheme
[-ProvisioningSchemeName] <String>
[-VMCpuCount <Int32>]
[-VMMemoryMB <Int32>]
[-CustomProperties <String>]
[-ServiceOffering <String>]
[-PassThru]
[-MachineProfile <String>]
[-NetworkMapping <Hashtable>]
[-SecurityGroup <String[]>]
[-WriteBackCacheDiskSize <Int32>]
[-WriteBackCacheMemorySize <Int32>]
[-LoggingId <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Test-ProvSetProvScheme
[-ProvisioningSchemeName] <String>
[-VMCpuCount <Int32>]
[-VMMemoryMB <Int32>]
-IdentityPoolName <String>
[-CustomProperties <String>]
[-ServiceOffering <String>]
[-PassThru]
[-MachineProfile <String>]
[-NetworkMapping <Hashtable>]
[-SecurityGroup <String[]>]
[-WriteBackCacheDiskSize <Int32>]
[-WriteBackCacheMemorySize <Int32>]
[-LoggingId <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Test-ProvSetProvScheme
[-ProvisioningSchemeName] <String>
[-VMCpuCount <Int32>]
[-VMMemoryMB <Int32>]
-IdentityPoolUid <Guid>
[-CustomProperties <String>]
[-ServiceOffering <String>]
[-PassThru]
[-MachineProfile <String>]
[-NetworkMapping <Hashtable>]
[-SecurityGroup <String[]>]
[-WriteBackCacheDiskSize <Int32>]
[-WriteBackCacheMemorySize <Int32>]
[-LoggingId <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Test-ProvSetProvScheme
-ProvisioningSchemeUid <Guid>
[-VMCpuCount <Int32>]
[-VMMemoryMB <Int32>]
[-CustomProperties <String>]
[-ServiceOffering <String>]
[-PassThru]
[-MachineProfile <String>]
[-NetworkMapping <Hashtable>]
[-SecurityGroup <String[]>]
[-WriteBackCacheDiskSize <Int32>]
[-WriteBackCacheMemorySize <Int32>]
[-LoggingId <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Test-ProvSetProvScheme
-ProvisioningSchemeUid <Guid>
[-VMCpuCount <Int32>]
[-VMMemoryMB <Int32>]
-IdentityPoolName <String>
[-CustomProperties <String>]
[-ServiceOffering <String>]
[-PassThru]
[-MachineProfile <String>]
[-NetworkMapping <Hashtable>]
[-SecurityGroup <String[]>]
[-WriteBackCacheDiskSize <Int32>]
[-WriteBackCacheMemorySize <Int32>]
[-LoggingId <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Test-ProvSetProvScheme
-ProvisioningSchemeUid <Guid>
[-VMCpuCount <Int32>]
[-VMMemoryMB <Int32>]
-IdentityPoolUid <Guid>
[-CustomProperties <String>]
[-ServiceOffering <String>]
[-PassThru]
[-MachineProfile <String>]
[-NetworkMapping <Hashtable>]
[-SecurityGroup <String[]>]
[-WriteBackCacheDiskSize <Int32>]
[-WriteBackCacheMemorySize <Int32>]
[-LoggingId <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Description
Provides the ability to validate the parameters of an existing provisioning scheme without actually updating the provisioning scheme. It will output all the validation failures if any.
The following parameters can be tested:
- Number of CPUs that will be used for VMs created from the provisioning scheme.
- Maximum amount of memory that will be used for VMs created from the provisioning scheme.
- Identity pool that will be used for VMs created from the provisioning scheme.
- Machine profile that will be used for VMs created from the provisioning scheme.
- Cloud service offering that will be used for VMs created from the provisioning scheme.
- Custom properties of the provisioning scheme that are specific to the target hosting infrastructure.
Examples
EXAMPLE 1
Validates the given provisioning scheme parameters
Test-ProvSetProvScheme -ProvisioningSchemeName MyScheme -WriteBackCacheDiskSize 50 -VMCpuCount 50 -VMMemoryMB 1000
Parameters ErrorId ErrorCategory ErrorMessage
---------- ------- ------------- ------------
{WriteBackCacheDiskSize} WriteBackCacheParametersNotNeeded McsValidationErrorCategory WriteBackCacheDiskSize is not needed when write back cache is disabled.
{CpuCount, MemoryMB} CpuAndMemorySettingViaServiceOfferingOnly McsValidationErrorCategory Hypervisor does not support setting cpu or memory directly, they can only be specified via ServiceOffering.
<!--NeedCopy-->
Parameters
-ProvisioningSchemeName
The name of the provisioning scheme to be updated.
| Type: | String |
| Position: | 2 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IdentityPoolName
The name of the identity pool to be used for the provisioning scheme, replacing the present one.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IdentityPoolUid
The unique identifier of the identity pool to be used for the provisioning scheme, replacing the present one.
| Type: | Guid |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ProvisioningSchemeUid
The identifier of the provisioning scheme to be updated.
| Type: | Guid |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-VMCpuCount
The number of processors that will be used to create VMs from the provisioning scheme, replacing the present one.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-VMMemoryMB
The maximum amount of memory that will be used to created VMs from the provisioning scheme in MB, replacing the present one.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CustomProperties
The properties of the provisioning scheme that are specific to the target hosting infrastructure. See about_Prov_CustomProperties for more information. If a property name already exists its value is updated; otherwise it is added.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ServiceOffering
The Service Offering to use when creating VMs in Cloud Hypervisors, replacing the present one.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PassThru
Returns the affected record. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MachineProfile
Currently only supported with Azure and AWS. Defines the inventory path to the source VM used by the provisioning scheme as a template. This profile identifies the properties for the VMs created from the scheme. The VM must be in the hosting unit that HostingUnitName or HostingUnitUid refers to. If any properties are present in the MachineProfile but not the CustomProperties, values from the template will be written back to the CustomProperties.
Valid paths are of the format: XDHyp:\HostingUnits\<HostingUnitName>\<path>\<VMName>.vm
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NetworkMapping
Specifies how the attached NICs are mapped to networks. If this parameter is omitted, the current NICs setting of the provisioning scheme is not updated; otherwise the NICs setting is updated, and new machines will be created with the number of NICs specified in the map, with each NIC attached to the specified network. Cannot set to an empty value.
| Type: | Hashtable |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SecurityGroup
The Security Groups to use when creating VMs in Cloud Hypervisors, replacing the present one.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WriteBackCacheDiskSize
Specifies the size in Gigabytes of the disk to use as a Write Back Cache when UseWriteBackCache is set during the Provisioning Scheme creation. This parameter can only be set or modified if the Provisioning Scheme was previously created with UseWriteBackCache. This parameter only applies to newly created VMs and does not affect VMs which have already been created from the Provisioning Scheme.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WriteBackCacheMemorySize
Specifies the size in Megabytes of the memory to use as a Write Back Cache when UseWriteBackCache is set during the Provisioning Scheme creation. This parameter can only be set or modified if the Provisioning Scheme was previously created with UseWriteBackCache. This parameter only applies to newly created VMs and does not affect VMs which have already been created from the Provisioning Scheme. Setting this parameter to 0 disables the use of memory for Write Back Cache.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-LoggingId
Specifies the identifier of the high-level operation this cmdlet call forms a part of. Citrix Studio and Director typically create high-level operations. PowerShell scripts can also wrap a series of cmdlet calls in a high-level operation by way of the Start-LogHighLevelOperation and Stop-LogHighLevelOperation cmdlets.
| Type: | Guid |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
CitrixCommonParameters
This cmdlet supports the common Citrix parameters: -AdminAddress, -AdminClientIP, -BearerToken, -TraceParent, -TraceState and -VirtualSiteId. For more information, see about_CitrixCommonParameters.
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
None
You can’t pipe objects to this cmdlet.
Outputs
IList<Citrix.MachineCreation.Sdk.ProvSchemeValidationFailure>
This object provides a list of validation error messages for given provisioning scheme parameters and contains the following information:
Parameters <IList<string>> Name of the parameter that failed validation
ErrorId <string> Error code
ErrorCategory <string> The source of error - MCS or Plugin
ErrorMessage <string> Friendly message describing the validation failure
Notes
In the case of failure, the following errors can result.
Error Codes
ProvisioningSchemeNotFound The specified provisioning scheme could not be located.
DatabaseError An error occurred in the service while attempting a database operation.
DatabaseNotConfigured The operation could not be completed because the database for the service is not configured.
ServiceStatusInvalidDb An error occurred in the service while attempting a database operation - communication with the database failed for for various reasons.
CommunicationError An error occurred while communicating with the service.
PermissionDenied The user does not have administrative rights to perform this operation.
ConfigurationLoggingError The operation could not be performed because of a configuration logging error.
HostingUnitNotFound The hosting unit referenced by the provisioning scheme could not be resolved.
NetworkPathResolutionFailed The specified network mapping contains invalid or empty network path value.
WriteBackCacheParametersNotNeeded WriteBackCacheDiskSize is not needed when write back cache is disabled.
CpuAndMemorySettingViaServiceOfferingOnly Hypervisor does not support setting cpu or memory directly, they can only be specified via ServiceOffering.
NetworkPathResolutionFailed The specified network path could not be resolved. Please ensure that the path includes a drive specification and path to a location within a HostingUnit.
InvalidMachineProfileMetadata Unable to read the metadata from machine profile.
MachineProfileNotSupportedByHypervisor The hypervisor does not support any functional capability for MachineProfile.
MachineProfileUpdateNotSupported Adding a MachineProfile to the catalog is not supported.
IncorrectTenancyType MachineProfile TenancyType does not match with provisioning scheme.
ServiceOfferingPathResolutionFailed The Service Offering path could not be resolved. Please ensure that the path includes a drive specification and path to a location within a HostingUnit.
SecurityGroupPathResolutionFailed The Security Group path could not be resolved. Please ensure that the path includes a drive specification and path to a location within a HostingUnit.
ExceptionThrown An unexpected error occurred. For more details, see the Windows event logs on the controller being used or Citrix Virtual Apps and Desktops logs.
Related Links
Share
Share
In this article
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.