Citrix Virtual Apps and Desktops SDK

Add-HypHypervisorConnectionAddress

August 3, 2023

Contributed by:

Add a connection address to a hypervisor connection.

Syntax

Add-HypHypervisorConnectionAddress [-LiteralPath] <String> [-HypervisorAddress] <String> [-LoggingId <Guid>] [-BearerToken <String>] [-TraceParent <String>] [-TraceState <String>] [-VirtualSiteId <String>] [-AdminAddress <String>] [<CommonParameters>]

<!--NeedCopy-->

Detailed Description

Use this command to add addresses by which a hypervisor can be contacted. All addresses added to a single hypervisor connection are assumed to be equivalent (i.e. they all result in the ability to communicate with the same hypervisors). The hypervisor that the addresses reference is stored at the point of creation of the hypervisor connection. Once this is done, to be valid, all addresses must resolve to this hypervisor.

The addresses required are; XenServer - The address of the XenServer machines (must all reference the same XenServer pool). VMWare vSphere/ESX - The address of a vCenter Server. Microsoft SCVMM/Hyper-V - the address of an SCVMM server.

Parameters

Name	Description	Required?	Pipeline Input	Default Value
LiteralPath	Specifies the path within a Host Service provider to the hypervisor connection item to which to add the address. The path specified must be in one of the following formats; :\Connections\ or :\Connections\{HypervisorConnection Uid>}	true	false
HypervisorAddress	Specifies the address to be used. The address will be validated and the hypervisor must be contactable at the address supplied.
XenServer (ConnectionType = XenServer) The address being added must reference the same XenServer pool referenced by any existing addresses for the same connection.	true	true (ByValue)
LoggingId	Specifies the identifier of the high-level operation this cmdlet call forms a part of. Citrix Studio and Director typically create high-level operations. PowerShell scripts can also wrap a series of cmdlet calls in a high-level operation by way of the Start-LogHighLevelOperation and Stop-LogHighLevelOperation cmdlets.	false	false
BearerToken	Specifies the bearer token assigned to the calling user	false	false
TraceParent	Specifies the trace parent assigned for internal diagnostic tracing use	false	false
TraceState	Specifies the trace state assigned for internal diagnostic tracing use	false	false
VirtualSiteId	Specifies the virtual site the PowerShell snap-in will connect to.	false	false
AdminAddress	Specifies the address of a XenDesktop controller to which the PowerShell snap-in connects. You can provide this as a host name or an IP address.	false	false	LocalHost. Once a value is provided by any cmdlet, this value becomes the default.

Input Type

Return Values

Citrix.Host.Sdk.Hypervisorconnection

Add-HypHypervisorConnectionAddress returns an object containing the new definition of the hypervisor connection. HypervisorConnectionUid <Guid> Specifies the unique identifier for the hypervisor connection. HypervisorConnectionName <string> Specifies the name of the hypervisor connection. ConnectionType <Citrix.XDInterServiceTypes.ConnectionType> Specifies the connection type of the connection. XenServer - A Citrix Hypervisor hypervisor SCVMM - A Microsoft SCVMM/Hyper-V hypervisor vCenter - A VMWare vSphere/ESX hypervisor Custom - A 3rd party hypervisor HypervisorAddress <string[]> A list of addresses that can be used to communicate with the hypervisor. UserName <string> The user name that is used when connecting to the hypervisor. Persistent <Boolean> Indicates whether the connection is stored in the database or is a temporary connection only with the same lifetime as the current Powershell session. PlugInId <string> The Citrix identifier for the Citrix Machine Management plug-in. Revision <Guid> Identifier for the current version of the hypervisor connection. This value changes every time a property of the hypervisor connection is updated. SupportsPvsVMs <Boolean> Indicates whether or not the connection can be used as part of a hosting unit and therefore used by the Citrix XenDesktop Machine Creation Service to create virtual machines. Only the built-in supported hypervisor connection types can be used for this (i.e. XenServer, SCVMM and vCenter). Metadata <Citrix.Host.Sdk.Metadata[]> A list of key value pairs that can store additional information relating to the hosting unit.

Notes

The address format must be valid for the hypervisor connection. The rules that are applied are as below: XenServer (HypervisorConnection Type = XenServer) http:\\<IP Address> or http:\\<server Name> or https:\\<server Name> Note: To use multiple addresses to the same XenServer pool to provide failover functionality, all XenServers in the pool must have a shared block storage device. If the use of https connections and failover is required, the certificates on the servers must be trusted by all of the controllers (typically this means having a root certificate installed). Note: If XenServers are moved to new XenServer pools after being added to a hypervisor connection, unpredictable results can occur. Once a XenServer is assigned to a hypervisor connection, it must not be moved to a new XenServer pool. In the case of failure the following errors can result. Error Codes

InputConnectionsPathInvalid The path provided is not to an item in a sub directory of a hosting unit item. HypervisorConnectionAddressForeignKeyObjectDoesNotExist The hypervisor connection to which the address is to be added could not be located. ConnectionAddressInvalid The address could not be used to contact a hypervisor or the validation rules have not been met. HypervisorConnectionAddressDuplicateObjectExists The address specified is already part of the hypervisor connection. HypervisorInMaintenanceMode The hypervisor for the connection is in maintenance mode. DatabaseError An error occurred in the service while attempting a database operation. DatabaseNotConfigured The operation could not be completed because the database for the service is not configured. DataStoreException An error occurred in the service while attempting a database operation - communication with the database failed for various reasons. CommunicationError An error occurred while communicating with the service. PermissionDenied The user does not have administrative rights to perform this operation. ExceptionThrown An unexpected error occurred. To locate more details, see the Windows event logs on the controller being used or examine the XenDesktop logs.

Examples

Example 1

c:\PS>Add-HypHypervisorConnectionAddress -LiteralPath XDHyp:\Connections\MyConnection -HypervisorAddress http:\\myserver.com

PSPath                   : Citrix.HostingUnitService.Admin.V1.0\Citrix.Hypervisor::XDHyp:\Connections\MyConnection

PSParentPath             : Citrix.HostingUnitService.Admin.V1.0\Citrix.Hypervisor::XDHyp:\Connections

PSChildName              : MyConnection

PSDrive                  : XDHyp

PSProvider               : Citrix.HostingUnitService.Admin.V1.0\Citrix.Hypervisor

PSIsContainer            : True

HypervisorConnectionUid  : 85581f42-c5da-4976-970c-ebc3448ea1e3

HypervisorConnectionName : MyConnection

ConnectionType           : XenServer

HypervisorAddress        : {http:\\myserver2.com,http:\\myserver.com}

UserName                 : root

Persistent               : False

PluginId                 : XenFactory

SupportsPvsVMs           : True

Revision                 : 4c95c857-c54d-4f92-abef-0cce32c02502

Metadata                 :

<!--NeedCopy-->

Description

Add the address ‘http:\\myserver.com’ to the hypervisor connection called “MyConnection”.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

Add-HypHypervisorConnectionAddress

August 3, 2023

Contributed by:

August 3, 2023

Contributed by:

Add-HypHypervisorConnectionAddress

Syntax

Detailed Description

Related Commands

Parameters

Input Type

Return Values

Citrix.Host.Sdk.Hypervisorconnection

Notes

Examples

Example 1

Description

In this article