-
Understanding the Citrix Virtual Apps and Desktops Administration Model
-
-
-
-
-
Get-BrokerHypervisorAlert
-
-
-
-
-
-
-
-
-
-
-
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
Get-BrokerHypervisorAlert
Gets hypervisor alerts recorded by the controller.
Syntax
Get-BrokerHypervisorAlert
[-HostingServerName <String>]
[-HypervisorConnectionUid <Int32>]
[-Metadata <String>]
[-Metric <AlertMetric>]
[-Severity <AlertSeverity>]
[-Time <DateTime>]
[-TriggerInterval <TimeSpan>]
[-TriggerLevel <Double>]
[-TriggerPeriod <TimeSpan>]
[-TriggerValue <Double>]
[-Property <String[]>]
[-ReturnTotalRecordCount]
[-MaxRecordCount <Int32>]
[-Skip <Int32>]
[-SortBy <String>]
[-Filter <String>]
[-FilterScope <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Get-BrokerHypervisorAlert
-Uid <Int64>
[-Property <String[]>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Description
The Get-BrokerHypervisorAlert cmdlet gets alert objects reported by the hypervisors that the controller is monitoring.
Without parameters, Get-BrokerHypervisorAlert gets all of the alerts recorded. Use parameters to select which alerts are returned.
Once you have configured suitable alerts in your hypervisor, and configured the controller with your hypervisor details (see New-BrokerHypervisorConnection), the controller monitors each hypervisor for new alerts.
Four hypervisor alert metrics are recorded; these relate to the hypervisor host, not individual virtual machines:
- Cpu: Reports excessive CPU usage.
- Memory: Reports excessive memory usage.
- Network: Reports high network activity.
- Disk: Reports high disk activity.
Each alert also includes information about where and when the alert occurred, the severity of the alert (Red/Yellow), and the configuration of the triggered alert.
The following metrics are supported with these hypervisors:
- VMware ESX (Cpu, Memory, Network, Disk)
- Citrix XenServer (Cpu, Network)
- Microsoft Hyper-V (None)
————————– BrokerHypervisorAlert Object
The BrokerHypervisorAlert represents a hypervisor alert object. It contains the following properties:
-
HostingServerName (System.String)
The name of the hypervisor hosting this machine.
-
HypervisorConnectionUid (System.Int32)
The Uid of the hypervisor connection that reported this alert.
-
MetadataMap (System.Collections.Generic.Dictionary<string, string>)
Metadata for this hypervisor alert.
-
Metric (Citrix.Broker.Admin.SDK.AlertMetric)
The metric this alert relates to: Cpu, Memory, Network, Disk, HostConnection or HostReboot.
-
Severity (Citrix.Broker.Admin.SDK.AlertSeverity)
Severity of the alert (Red or Yellow). Red is more serious than Yellow.
-
Time (System.DateTime)
Time that the alert occurred.
-
TriggerInterval (System.TimeSpan?)
Number of ticks (100ns) before the alert can be raised again.
-
TriggerLevel (System.Double?)
Threshold level that the alert was configured to trigger at.
-
TriggerPeriod (System.TimeSpan?)
Duration the value was above the trigger level.
-
TriggerValue (System.Double?)
The value of the monitored metric that triggered the alert.
-
Uid (System.Int64)
The unique internal identifier of this alert.
Examples
EXAMPLE 1
Returns all serious (Red) alerts for any hosting server with a name that starts with ‘TestHyp’.
Get-BrokerHypervisorAlert -HostingServerName TestHyp* -Severity Red
<!--NeedCopy-->
EXAMPLE 2
Returns all CPU usage alerts that occurred in the last hour.
Get-BrokerHypervisorAlert -Filter { Metric -eq 'Cpu' -and Time -ge '-1:0' }
<!--NeedCopy-->
Parameters
-Uid
Gets the hypervisor alert with the specified UID.
Type: | Int64 |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-HostingServerName
Gets alerts for the specified hosting hypervisor server.
Type: | String |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | True |
-HypervisorConnectionUid
Gets alerts for the specified hypervisor connection.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Metadata
Gets records with matching metadata entries.
The value being compared with is a concatenation of the key name, a colon, and the value. For example: -Metadata “abc:x*” matches records with a metadata entry having a key name of “abc” and a value starting with the letter “x”.
Type: | String |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Metric
Gets alerts for a specified metric.
Valid values are: Cpu, Memory, Network and Disk.
Type: | AlertMetric |
Accepted values: | Cpu, Memory, Network, Disk, HostConnection, HostReboot, HypervisorConnectionUnavailable |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Severity
Gets alerts with the specified severity.
Valid values are: Red and Yellow.
Type: | AlertSeverity |
Accepted values: | Red, Yellow |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Time
Gets alerts that occurred at a specific time.
You can also use -Filter and relative comparisons; see the examples for more information.
Type: | DateTime |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-TriggerInterval
Gets alerts with a specific trigger interval. This is the interval before the alert is raised again.
Type: | TimeSpan |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-TriggerLevel
Gets alerts with a specific trigger threshold level.
Type: | Double |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-TriggerPeriod
Gets alerts with a specific trigger period. This is the duration the threshold level was exceeded for, prior to the alert triggering.
Type: | TimeSpan |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-TriggerValue
Gets the value of the monitored metric that triggered the alert.
Type: | Double |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ReturnTotalRecordCount
When specified, this causes the cmdlet to output an error record containing the number of records available. This error record is additional information and does not affect the objects written to the output pipeline. See about_Broker_Filtering for details.
Type: | SwitchParameter |
Position: | Named |
Default value: | False |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-MaxRecordCount
Specifies the maximum number of records to return.
Type: | Int32 |
Position: | Named |
Default value: | 250 |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Skip
Skips the specified number of records before returning results. Also reduces the count returned by -ReturnTotalRecordCount.
Type: | Int32 |
Position: | Named |
Default value: | 0 |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-SortBy
Sorts the results by the specified list of properties. The list is a set of property names separated by commas, semi-colons, or spaces. Optionally, prefix each name with a + or - to indicate ascending or descending order. Ascending order is assumed if no prefix is present.
Type: | String |
Position: | Named |
Default value: | The default sort order is by name or unique identifier. |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Filter
Gets records that match a PowerShell style filter expression. See about_Broker_Filtering for details.
Type: | String |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-FilterScope
Gets only results allowed by the specified scope id.
Type: | Guid |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Introduced in: | Citrix Virtual Apps and Desktop 7 2106 |
-Property
Specifies the properties to be returned. This is similar to piping the output of the command through Select-Object, but the properties are filtered more efficiently at the server.
Type: | String[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
CitrixCommonParameters
This cmdlet supports the common Citrix parameters: -AdminAddress, -AdminClientIP, -BearerToken, -TraceParent, -TraceState and -VirtualSiteId. For more information, see about_CitrixCommonParameters.
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
None
You cannot pipe objects to this cmdlet.
Outputs
Citrix.Broker.Admin.SDK.HypervisorAlert
Get-BrokerHypervisorAlert returns an object for each matching alert.
Related Links
Share
Share
In this article
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.