-
Understanding the Citrix Virtual Apps and Desktops Administration Model
-
-
Repair-AcctADAccount
-
-
-
-
-
-
-
-
-
-
-
-
-
-
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
Repair-AcctADAccount
Resets the Active Directory (AD) password for the given accounts.
Syntax
Repair-AcctADAccount
[-Password <String>]
[-SecurePassword <SecureString>]
[-ADUserName <String>]
[-ADPassword <SecureString>]
[-Force]
[-ResetOnly]
[-UseServiceAccount]
[-LoggingId <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Repair-AcctADAccount
-ADAccountName <String[]>
[-Password <String>]
[-SecurePassword <SecureString>]
[-ADUserName <String>]
[-ADPassword <SecureString>]
[-Force]
[-ResetOnly]
[-UseServiceAccount]
[-LoggingId <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Repair-AcctADAccount
-ADAccountSid <String[]>
[-Password <String>]
[-SecurePassword <SecureString>]
[-ADUserName <String>]
[-ADPassword <SecureString>]
[-Force]
[-ResetOnly]
[-UseServiceAccount]
[-LoggingId <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Description
This provides the ability to repair accounts in the ‘Tainted’ state by synchronizing the account password stored in Active Directory (AD) with the password stored in the AD Identity Service. If successful, this results in the account state being reset to ‘Available’ so it can be consumed by other Machine Creation Services.
If the current account password is not supplied using the Password or SecurePassword Parameters, this requires the user who initiated the runspace to have the required permissions in AD to reset the AD account password. If the current user does not have sufficient privileges, the ADUserName and ADPassword parameters may be used instead.
If the current account password is supplied then this command will use the password change operation which does not require any elevated permissions in AD.
Examples
EXAMPLE 1
Repairs the tainted accounts account and account2. After the repair operation, there are no more tainted accounts.
Get-AcctADAccount -State Tainted | Select-Object ADAccountName
ADAccountName
-------------
Domain\account
Domain\account2
Repair-AcctADAccount -ADAccountName "Domain\account","Domain\account2"
SuccessfulAccountsCount FailedAccountsCount FailedAccounts
----------------------- ------------------- --------------
2 0 {}
Get-AcctADAccount -State Tainted
<!--NeedCopy-->
Parameters
-ADAccountName
The names of the AD accounts that are to be repaired. AD accounts are accepted in the following formats: Fully qualified DN e.g. CN=MyComputer,OU=Computers,DC=MyDomain,DC=Com; UPN format e.g MyComputer@MyDomain.Com
; Domain qualified e.g MyDomain\MyComputer.
Type: | String[] |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ADAccountSid
The SID(s) of the accounts that are to be repaired.
Type: | String[] |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | True (ByPropertyName, ByValue) |
Accept wildcard characters: | False |
-Password
The current password for the computer account.
Type: | String |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-SecurePassword
The current password for the account (provided in a Secure String class).
Type: | SecureString |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ADUserName
The username for an AD user account with Write Permissions. This parameter must be used if the current user does not have the necessary privileges.
Type: | String |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ADPassword
The matching password for an AD user account with Write Permissions. This parameter must be used if the current user does not have the necessary privileges.
Type: | SecureString |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Force
Indicates whether accounts that are marked as ‘in-use’ can be repaired or not.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ResetOnly
Indicates whether only resetting machine password and trust keys without updating the states to ‘Available’ if the accounts that are marked as ‘InUse’. This parameter will be sliently ignored by the accounts which states are not ‘InUse’.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Introduced in: | Citrix Virtual Apps and Desktop 7 2308 |
-UseServiceAccount
Use the service account of IdentityPool which the account belongs to to repair AD account.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Introduced in: | Citrix Virtual Apps and Desktop 7 2407 |
-LoggingId
Specifies the identifier of the high-level operation this cmdlet call forms a part of. Citrix Studio and Director typically create high-level operations. PowerShell scripts can also wrap a series of cmdlet calls in a high-level operation by way of the Start-LogHighLevelOperation and Stop-LogHighLevelOperation cmdlets.
Type: | Guid |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
CitrixCommonParameters
This cmdlet supports the common Citrix parameters: -AdminAddress, -AdminClientIP, -BearerToken, -TraceParent, -TraceState and -VirtualSiteId. For more information, see about_CitrixCommonParameters.
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
None
You can’t pipe objects to this cmdlet.
Outputs
Citrix.ADIdentity.Sdk.AccountOperationSummary
The Repair-AcctADAccout command returns an object with the following parameters: SuccessfulAccountsCount <int>
The number of accounts that were repaired successfully.
FailedAccountsCount <int>
The number of accounts that were not repaired.
FailedAccounts <Citrix.ADIdentity.Sdk.AccountError[]>
The list of accounts that failed to be repaired. Each one has the following parameters:
ADAccountName <string>
ADAccountSid <String>
ErrorReason <ADIdentityStatus>
This can be one of the following
UnableToConvertDomain
IdentityNotLocatedInDomain
IdentityNotFound
IdentityObjectInUse
IdentityObjectLocked
ADServiceDatabaseError
ADServiceDatabaseNotConfigured
ADServiceStatusInvalidDb
FailedToConnectToDomainController
FailedToExecuteSearchInAD
FailedToAccessComputerAccountInAD
FailedToSetPasswordInAD
FailedToChangePasswordInAD
DiagnosticInformtion <Exception>
Any other error information
Notes
In the case of failure, the following errors can result.
Error Codes
PermissionDenied
The user does not have administrative rights to perform this operation.
ConfigurationLoggingError
The operation could not be performed because of a configuration logging error
DatabaseError
An error occurred in the service while attempting a database operation.
DatabaseNotConfigured
The operation could not be completed because the database for the service is not configured.
ServiceStatusInvalidDb
An error occurred in the service while attempting a database operation - communication with database failed for various reasons.
CommunicationError
An error occurred while communicating with the service.
ExceptionThrown
An unexpected error occurred. To locate more details, see the Windows event logs on the controller being used or examine the Citrix Virtual Apps and Desktops logs.
Related Links
Share
Share
In this article
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.