-
Understanding the Citrix Virtual Apps and Desktops Administration Model
-
-
-
-
-
-
-
-
-
-
-
-
Add-MonitorNotificationPolicyCondition
-
-
-
-
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
Add-MonitorNotificationPolicyCondition
Add conditions to the existing policy specified and returns the updated policy.
Syntax
Add-MonitorNotificationPolicyCondition
[-LoggingId <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Add-MonitorNotificationPolicyCondition
-InputObject <MonitorNotificationPolicy>
[-AlertThreshold <Int32>]
[-AlarmThreshold <Int32>]
[-AlertRenotification <TimeSpan>]
[-AlarmRenotification <TimeSpan>]
[-SearchWindow <TimeSpan>]
[-AlertConditionPersistenceInterval <TimeSpan>]
[-AlarmConditionPersistenceInterval <TimeSpan>]
[-Granularity <TimeSpan>]
[-AlertSampleCount <Int32>]
[-AlarmSampleCount <Int32>]
[-AlertSamplePercent <Int32>]
[-AlarmSamplePercent <Int32>]
[-DataSource <Int32>]
[-UptimeHoursThreshold <Int32>]
[-UptimePeriodType <MachineUptimePeriodType>]
[-NextRunAt <DateTime>]
[-AlertTriggeredBy <PowerActionTriggeredBy>]
[-AlertReasonOfFailure <PowerActionFailureReasonCode>]
[-AlarmTriggeredBy <PowerActionTriggeredBy>]
[-AlarmReasonOfFailure <PowerActionFailureReasonCode>]
[-LoggingId <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Add-MonitorNotificationPolicyCondition
-Uid <Int64>
-ConditionType <ConditionType>
[-AlertThreshold <Int32>]
[-AlarmThreshold <Int32>]
[-AlertRenotification <TimeSpan>]
[-AlarmRenotification <TimeSpan>]
[-SearchWindow <TimeSpan>]
[-AlertConditionPersistenceInterval <TimeSpan>]
[-AlarmConditionPersistenceInterval <TimeSpan>]
[-Granularity <TimeSpan>]
[-AlertSampleCount <Int32>]
[-AlarmSampleCount <Int32>]
[-AlertSamplePercent <Int32>]
[-AlarmSamplePercent <Int32>]
[-DataSource <Int32>]
[-UptimeHoursThreshold <Int32>]
[-UptimePeriodType <MachineUptimePeriodType>]
[-NextRunAt <DateTime>]
[-AlertTriggeredBy <PowerActionTriggeredBy>]
[-AlertReasonOfFailure <PowerActionFailureReasonCode>]
[-AlarmTriggeredBy <PowerActionTriggeredBy>]
[-AlarmReasonOfFailure <PowerActionFailureReasonCode>]
[-LoggingId <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Description
Add conditions to the existing policy specified and returns the updated policy.
Examples
EXAMPLE 1
Add SessionsConcurrentCount condition to the policy matching the id 100
$timeSpan = New-TimeSpan -Seconds 30
$alertThreshold = 10
$alarmThreshold = 20
Add-MonitorNotificationPolicyCondition -Uid 100 -ConditionType SessionsConcurrentCount -AlertThreshold $alertThreshold -AlarmThreshold $alarmThreshold -AlertRenotification $timeSpan -AlarmRenotification $timeSpan
<!--NeedCopy-->
Parameters
-InputObject
Specifies the policy object to which the conditions to be added
Type: | MonitorNotificationPolicy |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | True (ByValue) |
Accept wildcard characters: | False |
-Uid
Specifies the unique identifier of the policy to which the conditions to be added
Type: | Int64 |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ConditionType
Type of the condition using a text string converted to an enum value Possible values are
- SessionsConcurrentCount
- SessionsPeakconnectedCount
- SessionsPeakDisconnectedCount
- AverageLogonDuration
- RDSLoadEvaluator
- ConnectionFailuresRate
- ConnectionFailuresCount
- FailedServerMachineCount
- FailedDesktopMachineCount
- LogonDuration
- IcaRoundtripTime
- IcaRoundtripTimeAverage
- IcaRoundtripTimeSessionCount
- IcaRoundtripTimeSessionPercent
- MemoryUsage
- CpuUsage
- FailedMachinePercentage
- UnregisteredMachinesPercentage
- CCAgentDiscovery
- CCAgentLogger
- CCCredentialProvider
- CCWebRelayProvider
- CCNetScalerCloudGateway
- CCADProvider
- CCCDFCaptureService
- CCConnectionLeaseExchangeService
- CCHeartbeatFailure
- MachineUptime
- FailedPowerOnAction
- FailedPowerOffAction
Type: | ConditionType |
Accepted values: | Unknown, SessionsConcurrentCount, SessionsPeakconnectedCount, SessionsPeakDisconnectedCount, AverageLogonDuration, RDSLoadEvaluator, ConnectionFailuresRate, ConnectionFailuresCount, FailedServerMachineCount, FailedDesktopMachineCount, LogonDuration, IcaRoundtripTime, IcaRoundtripTimeAverage, IcaRoundtripTimeSessionCount, IcaRoundtripTimeSessionPercent, MemoryUsage, CpuUsage, FailedMachinePercentage, LocalHostCacheNotification, LocalHostCacheConfigSyncFailure, LocalHostCacheConfigSyncServiceFailure, UnregisteredMachinesPercentage, CCAgentWatchDog, CCAgentDiscovery, CCAgentLogger, CCCredentialProvider, CCWebRelayProvider, CCNetScalerCloudGateway, CCADProvider, CCCDFCaptureService, CCConnectionLeaseExchangeService, CCHeartbeatFailure, MachineUptime, FailedPowerOnAction, FailedPowerOffAction |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-AlertThreshold
Threshold value at which the warning notification will be triggered
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-AlarmThreshold
Threshold value at which the critical notification will be triggered
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-AlertRenotification
Duration after which the warning notification will be re-triggered
Type: | TimeSpan |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-AlarmRenotification
Duration after which the critical notification will be re-triggered
Type: | TimeSpan |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-SearchWindow
The amount of time the condition query will look back for the matching record when it examines the data.
Type: | TimeSpan |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-AlertConditionPersistenceInterval
The amount of time the condition query will look back to check if the alert condition was persisted.
Type: | TimeSpan |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-AlarmConditionPersistenceInterval
The amount of time the condition query will look back to check if the alarm condition was persisted.
Type: | TimeSpan |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Granularity
Defines the granularity of the rate in seconds. This value is applicable for ‘ConnectionFailuresRate’ condition.
Type: | TimeSpan |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-AlertSampleCount
Defines the count of instances to measure before raising the warning notification. This value is applicable for ICA RTT (Session Count) condition.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-AlarmSampleCount
Defines the count of instances to measure before raising the critical notification. This value is applicable for ICA RTT (Session Count) condition.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-AlertSamplePercent
Defines the percentage of instances to measure before raising the warning notification. This value is applicable for ICA RTT (Session Percent) condition.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-AlarmSamplePercent
Defines the percentage of instances to measure before raising the critical notification. This value is applicable for ICA RTT (Session Percent) condition.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-DataSource
Defines the data source type of condition.
Type: | Int32 |
Position: | Named |
Default value: | 0 |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Introduced in: | Citrix Virtual Apps and Desktop 7 2407 |
-UptimeHoursThreshold
Defines the threshold hours for machine uptime. This value is applicable for ‘MachineUptime’ condition.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Introduced in: | Citrix Virtual Apps and Desktop 7 2407 |
-UptimePeriodType
Defines the threshold period - hours/day, hours/week or hours/month for machine uptime. This value is applicable for ‘MachineUptime’ condition.
Type: | MachineUptimePeriodType |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Introduced in: | Citrix Virtual Apps and Desktop 7 2407 |
-NextRunAt
Defines the next evaluation time for machine uptime alert. This value is applicable for ‘MachineUptime’ condition.
Type: | DateTime |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Introduced in: | Citrix Virtual Apps and Desktop 7 2407 |
-AlertTriggeredBy
Defines the source of power action that cases alert. Applicable for ‘FailedPowerOnAction’ and ‘FailedPowerOffAction’ alerts. Possible values are
- Any
- Administrator
- Autoscale
- EndUser
- Schedule
Type: | PowerActionTriggeredBy |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Introduced in: | Citrix Virtual Apps and Desktop 7 2407 |
-AlertReasonOfFailure
Defines the reason of power action failure. Applicable for ‘FailedPowerOnAction’ and ‘FailedPowerOffAction’ alerts. Possible values are
- Any
- HypervisorRateLimitExceeded
- HypervisorReportedFailure
Type: | PowerActionFailureReasonCode |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Introduced in: | Citrix Virtual Apps and Desktop 7 2407 |
-AlarmTriggeredBy
Defines the source of power action that cases alarms. Applicable for ‘FailedPowerOnAction’ and ‘FailedPowerOffAction’ alerts. Possible values are
- Any
- Administrator
- Autoscale
- EndUser
- Schedule
Type: | PowerActionTriggeredBy |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Introduced in: | Citrix Virtual Apps and Desktop 7 2407 |
-AlarmReasonOfFailure
Defines the reason of power action failure. Applicable for ‘FailedPowerOnAction’ and ‘FailedPowerOffAction’ alerts. Possible values are
- Any
- HypervisorRateLimitExceeded
- HypervisorReportedFailure
Type: | PowerActionFailureReasonCode |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Introduced in: | Citrix Virtual Apps and Desktop 7 2407 |
-LoggingId
Specifies the identifier of the high-level operation this cmdlet call forms a part of. Citrix Studio and Director typically create high-level operations. PowerShell scripts can also wrap a series of cmdlet calls in a high-level operation by way of the Start-LogHighLevelOperation and Stop-LogHighLevelOperation cmdlets.
Type: | Guid |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
CitrixCommonParameters
This cmdlet supports the common Citrix parameters: -AdminAddress, -AdminClientIP, -BearerToken, -TraceParent, -TraceState and -VirtualSiteId. For more information, see about_CitrixCommonParameters.
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
None
You can’t pipe objects to this cmdlet.
Outputs
MonitorNotificationPolicy
Returns the updated policy object
Related Links
Share
Share
In this article
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.